Where is "the rear guide " ?
Type: Posts; User: Gael
Where is "the rear guide " ?
I clean it and I still have the same problem.
The problem is only in A4 LEF. I have the same problem with the second trays
In A4 SEF i have another problem, i always have paper jam problems....
I adjusted the paper guides but I still have the same problem
Thank you. I have attached photos
1. The piece of plastic in the back of the tray has broken. ==> i don't think the piece is broken
2. After a jam, something is left in the back of the tray ==>...
Hi,
A Konica C220 does not detect the correct paper size. He tells me it's A5 instead of A4.
If you don't have a solution, is it possible to manually set the paper size?
I'm sorry I don't speak...
I will try to find the firmware and install it. Do you know where i can find the firmware ?
nobody can help me ?
Thanks for your help. I bought chips for the drums and i will change them.
Can you tell me if my settings are good for disabling notifications (see attachment) ?
Do i need to do something else ?...
If i understand correctly, Flipping the soft switch will not work if i do not change the drums ?
But if i flippe the soft switch and i change the drums, i'll never have a message again ?
So i Cleaned the transfert belt and the blade.
Now i have no thread but i dont know for how long.
Blackcat is right "the spout that carries the primary transfer waste toner to the waste bottle is...
What means SEF ?
I will do that and post back
Konica C220
you are too fast, i just fixed the attachment
Hello,
I have color line problems when i print or copy (44039. I have toner powder on my transfer unit.
Can someone help me ?
Im French and I am sorry for the quality of my english.
Gaël
Thanks again !
I cleaned the transfer belt as explained by christmu and now no noise and no need to buy a new photocopier.
Thank you very much, i try to do this and i make a feedback
Hello,
I have exactly the same problem than christmu.
EarthKmTech can you explain to me how to clean the transfer belt cleaning section?
Im French and I am sorry for the quality of my english....