Hi, turned out to be the Fiery X3ETY Video Board which had gone.
Type: Posts; User: Rusty Wood
Hi, turned out to be the Fiery X3ETY Video Board which had gone.
Hi Adrian, I was able to get hold of V1.2 install discs.
Thanks for your help.
Right, still no joy with this cyan problem ..
I cleaned and securely re-connected the thick SCSI cable between the Fiery and the IOT.
Cleaned all the contacts, and re-seated the cards in the...
Hi, how do I obtain the patches ..
Thanks
Rusty
Hi adriansto,
Thanks very much for your help .. I have just emailed you.
Regards
Rusty
Hi,
Not sure how I haven't found this site before now ..
Had good advice so far, so thanks for being here.
Rusty
Hi,
I would like to install Fiery System onto a new hard drive for my DC 250.
Installed is V1.1 6e on a X3eTY.
Does anyone have instructions or know where I might be able to find this.
...
Hi K,
I cleaned out and securely re-connected the thick SCSI cable between the Fiery and the IOT.
Cleaned all the contacts, and re-seated the cards in the Fiery and the IOT.
Cleaned and...
Hi K,
Yes, hopefully this is just hardware related .. especially now you pointed that out about the software, didn't think it would be such a pain.
Thanks again.
Rusty
Hi K,
Thanks for the response, really appreciate it.
Yep, they are great & very well made machines. :)
I'll do what you suggest and hopefully that will get us back up and running.
Not sure how...
Hi, I'm thinking this may be a software problem, but not sure how to rectify it.
After running some tests, Print Pattern & Copying are printing all colours correctly.
When printing new or...