Where can I find the settings for the fnisher? In the RIP ( Fiery ) or in the machine itself?
Type: Posts; User: leonardcahill
Where can I find the settings for the fnisher? In the RIP ( Fiery ) or in the machine itself?
SR4100 is not folding in half. It's 1/2" out of position. Is there an adjustment in there that i'm missing
TIa
My SR4100 is not folding in half. It's 1/2 out of position. Is there an adjustment in there that i'm missing
TIA
Len
Motor replaced, all codes cleared now. Back in business. Thanks so much for the help guys. You all Rock!!!
[QUOTE=mrwho;2190360]x2. Had that same situation once. Definitely check the motor @ the back of the machine.
See below: followed the bulletin and replace the motor with one from a spare / parts...
The manual that we have doesn't have this procedure in it. Got a link? Manual? Advice . Thanks
Replaced the motor in the back, it self destructed. New Code 398-04 and 540 has now emerged. Any takers. Thanks guys
Running lots of labels and the machine blew a code SC442. Any suggestions. Seems the lift tray at the feeder goes down and skips gears, then blows the code. Help! Thankyou
Thanks Slimbob. Is there a ProC5100s and a C5100 or are they both the same machines?
L
I'm about to purchase another Ricoh as mine shorted. Can anyone tell me the service life of this machine. In the past I've been unable to get parts due to the copier being out of it's service life....
RN I don't even know what parts availability are. Might have to replace the machine as I've a few thousand in supplies here. Know of any?
figured as much. question is where can I get the parts to fix it?
We did have a power surge here Wednesday. City's electrical is sending me trouble report. My OKI been acting up as well since. Now that's fixed and the Ricoh is still down. No scorching on the...
Can you offer a power supply ( if that is it)?
Machine was in sleep mode, I came in and seen the blue light around the sleep button. Hit the main power switch and it shut down, few minutes later it would not turn back on. Found a blown 5amp...
Upon reboot the copier will not start, the drawer is locked, found a 5 amp fuse blown. Replaced the fuse and still wont start with button. Any suggestion? No copier tech help in this remote area
...
Can anyone tell me what caused all the little bumps on my transfer belt. We just changed the belt cleaning unit and this happened. 47370 It's hard to see with the relection but it looks like the...
The tech came in, changed a bunch of parts and the problem came back in a week. Problem being the entire sheets was turned a bluish. Called them on the repair 30 day satisfaction warranty and he...
The day it arrived I called for a maintenance contract. They came and ran some numbers, never got back to me and when I called they stated they were not interested in offering a contract for that...
I would do just that but the service here is fair to poor. $150 an hour is a high price to pay when they don't fix the problems and my confidence in the service team isn't there. Downfall of being...
As I await service to come in I have been offered a Ricoh Aficio 830 DN with a booklet maker. Can you offer any advice on this? Is it within its service life? Recommended for a print shop? Service...
[QUOTE=slimslob;947244]SC 374-02 is the Cyan ID sensor pattern low density. Could be under toned or after market toner, developer or drum.
SC 919 has to do with communication with the Fiery. Make...
I am wondering if anyone can walk us through some problems here. I have given Ricoh 5100 PRO and have spent $3500 so far yet problems persist. I am tired of having them in only to have the same...