*****
Okay: so not only did I make sure that the Mailings menu of Word has the correct settings (number 10 envelope, upside down, short edge in), I also changed File / Print / Printer Properties /...
Type: Posts; User: Jason Engram
*****
Okay: so not only did I make sure that the Mailings menu of Word has the correct settings (number 10 envelope, upside down, short edge in), I also changed File / Print / Printer Properties /...
Yep. Toner hopper and toner motor completely replace with new items.
I personally ordered new seals and replaced them on the drum unit, and on the dev unit.
I replaced both the TD and ID...
Every time I do cleaning / maint (about 1x/mo) I hit that end connector on the Dev Unit and also the receiver in the copier with electronic parts cleaner (and, yes, I'm careful not to hit anything...
Now that's interesting.
The envelopes are standard US #10, but so that I don't have to keep going into the copier and changing it back and forth, the copier's internal menu is set to 8.5x11...
Hmmm... I'll pull the assembly and check that, but I didn't mention that I had a complete, new Savin Maintenance Kit that my colleague handed over when he gave me the copier. I replaced those items...
The envelopes are printed from the "Mailings / Envelopes" tab of MS Word 2016. The envelope is pulled from the bypass tray. It pulls "end to end" ie: the shorter side edge of the envelope is pulled...
I have a Savin 8035 / Ricoh 3035.
There is an annoyance that I thought was taken care of over the last couple of months, but within the last week started recurring.
After a seemingly random...
I have a Savin 8035 / Ricoh 3035.
The thing that is been driving me nuts for quite a while is the fact that while the copies are good, the envelopes always have a grey undefined (as in “not razor...
After rereading the thread, I just realized I forgot to make an earlier post.
AFTER the misalignment problems started happening, I DID take out the bracket, and the stapler unit, and pulled...
REPAIRED: SR790 Stapler Misaligned / Misses Paper
The problem has been repaired. In case this ever happens to anyone else, Here’s what happened:
As I noted above, until the problem was repaired, when a new stapler cartridge was loaded, and the...
I currently own a Savin 8035g / Ricoh 3035, with a SR790 finisher
Within the last week, it has suddenly decided to misalign the staples
A few times, the stapler barely catches the top edge of...