I no longer work for Kyocera dealer but need f/w for fs6530 was wondering if anyone has it, thanks all.
Type: Posts; User: Copierstud
I no longer work for Kyocera dealer but need f/w for fs6530 was wondering if anyone has it, thanks all.
The spam is showing up every where now.
Glad were getting such incite from a newbie tech who knows all there is to know about kyocera....maybe peeps should just put up random jam codes with no explanation and you can solve it for us.
Sorry for delay, The T series plotters are what were considering.
We are considering selling epson plotters just wondering if you guys have any experience with them and what your thoughts are on them. I work on kip and hp plotters but have not worked on an epson.
I have had this before. Main board fixed it.
Good chance the duplex drive gear is broken it will break right off the shaft its a common issue with these guys.
I have had this issue as well and turned out to be bad drum unit causing the code.
You are replying to a post that is 11 years old.
Thanks I appreciate it.
I am looking for a Sharp AR-M 257 service manual. I don't regularly work on Sharps but existing customer has one they would liked looked at, thanks.
Vertical conveying rollers and clutches....Have seen it about 100,000 times lol on the the falcon family.
Check spring and replace feed rollers. Have had this issue several times as we have a ton of these devil machines out...lol
Guys this thread is from 2010!
Are still able to print to it or are all functions not working?
Possibly stuck laser shutter but I believe they did away with them on this series.
I have had this problem and was a bad black drum.
I agree with you. But The feeder problems I could deal with but I could almost restring the scanner wires with my eyes closed before they fixed the spings lol.
Thats a good idea these guys really do fog up. I also have had the sliders break as well. Worst part of these guys was always optics and scanner problems.
5 year old thread brother.
Guys your replying to a thread from 6 years ago....I hope he has fixed it by now.
Replace the fuser.
Mines right too gotta look in right section for the machine your working on.
Have you replaced the registration clutch. Have had the issue as well a few times and reg clutch was the culprit.
We have a whopping one customer using it.