This may be an old thread, but i can't help comparing the MP4002/5002s with the MP03 and MP04 series. I have quite a number of these MP02 series still performing wonderfully great in the field...
Type: Posts; User: andrewdecruz
This may be an old thread, but i can't help comparing the MP4002/5002s with the MP03 and MP04 series. I have quite a number of these MP02 series still performing wonderfully great in the field...
Looks very straightforward....fuser sleeve or drum.
Hi Fellow Techs,
I am facing a really mind boggling problem with this SC Code 490 on my MPC3300.
The service code 490 pops out 1-2 seconds everytime i switched on the machine.
Apparently when i...
Check for a blown fuse in the power supply unit. Remember facing a similar problem with this model about 10 years ago. Am surprised that there are still some of these models in circulation. :o
[/QUOTE]
Since you replaced both the fuser and the PCDU at the same time, it is now even more difficult to pinpoint where the problem was in the first place.
Hi, sorry to say but this model is too old to support printing from the software Ricoh smart device. Only models from the 3 series range...I.e MP3010, 3030, AF3045 onwards can be use to print.
Hi and thanks again for your speedy reply. Yes, the paper tray heater is is one area which I didn't check. I will make it a point to check it out the first thing I attend to the problem. And as you...
Thanks again for your reply. Yes, I forgot to mention regarding the dust blade at the registration roller. I do performed a vacuuming of the dust blade at every service call due to the high volume of...
Thanks for your extremely highly appreciated reply.
Sorry, but I forget to mention that I have also replaced another PCU unit after facing the clogged toner issue with the previous PCU unit. And I...
Dear Fellow Techs,
Good day to all of you. Recently I have been facing some problems on a Ricoh Aficio 3045 where the toner seems to accumulate and gets clogged up in the drum unit when it is...
Hi Dear Fellow Techs,
Have any of you notice that when printing the copier counter list for model Ricoh MPC3300 you would have notice that the B & W total copies differs from the total copies of...
There is no drivers for Ricoh 2035 under Windows 10, but you can choose one from Windows 7 - 64 bit. As this model is already 14 years old (Introduced in 2003 and discontinued in 2005 ) it's...
This dinosaur dates back to the 90's.....Ricoh 6950. The duplex unit is built just below the drum and cleaning unit....big mistake. The cleaning unit is virtually a toner pig and it spills toner all...
Yes, you have a very logical point there about different part number not possible to interchange. Almost made a costly error. Thanks mate. :):)
Hi, I am just curious to know if the polygon motor for Ricoh 2238 can be used on MPC3300?? I have a few Ricoh 2238 which I am about to scrap off but would like to salvage the polygon motor for the...
That machine may not have reach dinosaur status yet in his country...haha:)
3M vacuum cleaners are just about the best there is in the market as it's specifically used for vacuuming fine toner particles for copiers. I have been using mine for 9 years and it is still in fine...
Sorry to say this, but in "human age" terms this model should be about 150 years old. It has certainly enjoyed it's fair share of the limelight during it's heyday. And yes, as was advise by most of...
Ricoh MP C2000 sat on a wall.....
Ricoh MP C2000 had a great fall...
All the kings horses, and all the king's men....
Couldn't put your Ricoh MP C2000 together again....
..........Heard this...
Dear All,
I feel oblidged to correct my earlier reply regarding the problem of paper folded when using tray 2,3 and 4.
In my last reply I mentioned that the problem was solved after replacing...
Hi Guys,
I got the problem solved after some hair raising moments! The problem lies with the Lever - Feed ( Part no : G065 2767 ) which is attached to the 2nd paper feed unit.
The paper fold...
Hi everyone. ..good day to you all😊
I have a Aficio 3045 which is giving me a nightmare. When printing from the 1st tray and bypass, the copies comes out absolutely fine. However, when doing the...
@slimslob.....I couldn't agree with you more.
It's a privilege to have you on board our forum with your more then excellent views and replies on various questionaire. Keep it up.
Aficio 1022 and 2022 are both different engines all together. One uses scanrouter software as a means for scanning and the other doesn't. It's the same for printing too.
Hi and Good Day Everyone,
I have a customer who have recently upgraded their server from Win Server 2003 to Win Server 2012. The problem is when the scanner for Aficio 3045 was configured on their...