Search:

Hey people,
Is there a way to somehow compare the config backups?


We have a customer who has MyQ running and as soon as the customer's config is installed, it takes a long time to log out... ...

I think it will be cleared too. Anyway, I tested it, unfortunately without success
Thanks

We ran "Clean All Data" multiple times. We also ran the reset tool over it several times.

I would have liked to have solved the problem... it would have helped our company and the community a bit. however, we have now wasted too much time and money

As I said, the Motor and the Flat Cable have already been replaced.
The sensor has been checked. Everything is good.

We are now getting the machine replaced by KonicaMinolta. There was a...

Its a new CPUB

I'm wondering why the scanner isn't moving... I don't think it's necessarily the C60-01. This error is only thrown because the scanner is not moving...
Motor, flat cable, CIS has...

Yes, the complete ADF was replaced, as I already mentioned in my initial post ;-)

Everything was installed and dismantled step-by-step.

Unfortunately, there is not much on the scanner. Just a motor and the CIS.
The scanner does not move and we have now renewed the base board...

We just have a bizhub 4050i in the shop for repair and we are desperate...

Have any of you had this error before and how did you fix it?

We have already renewed all relevant parts, including...

We currently have this error very often with the C3350i
A trouble reset is usually sufficient here, sometimes we also exchange the CIS and the flat cable...
But some of the machines come back with...

There is a "firmware" with a diagnostic tool that can tell you exactly what's broken.
Usually the SSD is broken or the file system on it is "read-only"

Does anyone know how to activate Service mode in FleetRMM?

everything that is 2mm thick and sticks! it's just a matter of shortening the gap. I did it today and the machine runs! Thanks to all

Hello everyone, is this modification still relevant with the new Exit Assy?


We have a machine with the same problem and have already swapped the Exit Assy (A5C0F8950F).
The paper is...

Hey thanks

my jump drives couldn't be formatted, so I did everything it said. It worked, but the firmware just won't install...



If no one has any more tips, I'll just leave it as it is and...

Hello and thank you for your many tips.
Unfortunately I still have the same problem.



The serial number was entered but wrong, I have now corrected it
Firmware update without MFP board.
...

Thank you, I'll check that out tomorrow. The machine type should match.


It's a C3351 and the type is A 2

So you mean I should only activate printer/scanner? Disable MFP?

Hello, everyone,

I have problems with a bizhub C3351... I can no longer install the firmware.

The machine was flattened with Clear All Data and the Reset Tool because it kept producing strange...

for me it was also a C364e!

can you explain how the error occurs? I disassembled the laser and saw nothing

You are absolutely right :rolleyes:
Unfortunately, it had to be done quickly and there was still an old machine standing around to be cannibalized. So we just started... It was the laser unit. I can...

hey i got the same error...

However, it is a C364e. First the power supply was defective.
After we exchanged the power supply, it suddenly stopped printing the color yellow.

We renewed Dev +...

Hello everyone,

We've had problems with the developer units in the 8 series for some time, starting with the C458. These break down again and again.
Mostly in magenta and yellow.

The error...

Has anyone of you already installed the modification for this?
There is a modified PWB for this...

We installed this for a customer and now we keep getting the error code 5372...
Firmware:...

Hey, can any of you tell me where to find the part number?

I can't find anything in the BSLJ and urgently need this spare part.

For example on the C554e it is under PH Unit. But that's not the...

The reset Tool and a new Storage Board