Hello, I hope this is the right place to post this or at least it will be allowed because I am hoping to get some knowledgeable opinions from technicians who know them about the HP PageWide Color...
Type: Posts; User: AKSturb01
Hello, I hope this is the right place to post this or at least it will be allowed because I am hoping to get some knowledgeable opinions from technicians who know them about the HP PageWide Color...
Thank you very much, I'll be in touch.
It's the X3e, internal.
I have a Konica 7920 with the onboard Fiery PostScript RIP/Hard Drive/Network adaptor that still works...sort of. It starts up normally and will copy from the scanner glass, but the RIP is dead.
...
Hello everyone,
I have a Riso HC5500 (yes, old, but still in service) and it's having a problem with the Magenta head.
Those of you who are familiar with the HC5500 know that it has 24...
The photos are deceptive: the actual prints were made on 11x17 24/60lb fed from Tray 1. I folded them before scanning because I used an old scanner that only takes up to legal size.
Contracts: ...
Thank you for the tip. Now for the faceplanting n00b question - LEF? All that comes to my mind is "Lubricate Every Fortnight."
Now, of course, I have to find out!
Amazing you answered. Before I wrote my post yesterday, I did some searching to at least try and see whether anyone had a similar problem and I saw your...
Thank you everyone for all the ideas and the help. Obviously I have several things to investigate and learn. Full disclosure department - I am not a technician by profession. I found this website...
Hello everyone,
I have a Bizhub 363 black and white machine and I'm having an image issue. If you view the attached photos, what is happening is that narrow vertical "smudge" bands are appearing...
I'm crossposting this with the Fax discussion area, hope that's appropriate.
I have an HC5500 with an IS700c RIP that was working beautifully until recently. For what I use it for it's terrific....
I have an HC5500 with an IS700c RIP that was working beautifully until recently. For what I use it for it's terrific.
Problem is that the RIP has become unbelivably slow. Sending even a single...
Clean the corotron wires on all 4 imaging units. There are two wires on each unit except for black, which has three.
It's an easy task but a little time consuming:
Make sure machine is...
Hello everyone,
I'm looking for an independent Xerox tech. who can perform a firmware upgrade on my privately-owned DC2045 so that I can run carbonless forms. As per the DC2045 Administration...
Thanks everyone it worked perfectly, machine back to life with no problems. Happy new year!
Thank you very much, I knew it had to be simple, I just don't have my PWS yet. I should have it soon.
This should be a very simple question, but it's the first time I've done it and I've never seen it done:
How do I refill my developer modules on a Xerox 2045? I want to do the Black first using...
As an aside, one of the reasons the previous owner cited for wanting to sell the machine was not-so-great front/back registration on heavier stocks, which was addressed with the 6060.
And it is...
It runs very well by the way. This is a DC2045 with less than a million clicks total, taken out of Xerox service in 2009. Purchased on eBay. Works perfectly.
Nope, never tried it. I'm not a technician by profession -- I own the machine and self-maintain it, so I didn't realize CW5 would work in place of CW4 on an EX2000d. This is a privately-owned...
Yes, multiple hard and soft reboots, same results. In a way this also "feels" as though a log file or something became corrupted somewhere, and as a result CW4 has lost the ability to log and track...
Nondestructive Department of Defense requirements (meaning you don't destroy the drive) require the entire volume to be rewritten with alternating patterns of 0s and 1s several times (I believe 5). ...
Thanks kandod I'm leaning toward that myself but I want to wait a while longer and see if anyone else has seen this kind of thing before. I wondered if it was maybe a network issue, either the...
Hello,
I have a DC2045 connected to a Fiery EX2000d running Command Workstation 4.1.0.30 that was running beautifully but now has a strange problem with the server.
The EX2000d appears on the...
Yes, and there is one other thing:
It actually is possible to set the printer so that NONE of the trays are inhibited from autoselection. I screwed up on that part, you can in fact make all four...