Search:

I forgot to mention in my original post they can print and scan without getting the message. It only happens when they try to copy.

Two days ago It came up with the message insufficient resources. I unplugged it and plugged back in and message went away. The message came back today.
Has anyone encountered this or have any...

C1PFD is located in the paper feed unit, which we replaced the whole unit with a new one.

We have a M2651 with about 115k and it will intermittently jam going up into the fuser and come up with a C1PFD_S1 jam code.
We have replaced the PS Unit, Paper feed unit 1, and the photo interrupt...

We've been cloning the HDD's from the MX 3050 & 3051 Series for awhile now. But we can't find a device to clone the SSD's.
Anyone Cloned the SSD from the BP series? If so what do you use as a cloner?

We have a MS-317DN & a MS-431 both streaking and leaving a hazy background, and both are using AAA brand MICR toner. Approximately 80% left on both drum units. No issues with standard toner. Anyone...

Thank You ridgemill

Does anyone know what file types will print from a usb. I can only get a jpg to show up. Is there a setting for PDF's. I can't find anything in the service or user manuals.

Thanks Wav

Hey guys
We're a Sharp dealership trying to help out one of our customers that has a HP printer.
Can anyone give me a part number for a formatter for a Laserjet Enterprise Flow MFP M631 ?
Thanks

Thanks a lot!
I'll give that a try.

We have a Laserjet Enterprise Flow MFP M631 with a 49.38.07 error code. We have done a cold reset and reflashed firmware to latest through the pre-boot menu.
This is all while disconnected from...

This was just put out in the field 2 weeks ago, brand new unit.
This message intermittently pops up and it's always after 1 or 2 prints of the job. It is not against anything to block airflow.
We...

Cool thanks

Anyone know if you can device clone on the MX-C357F or MX-C407F ?
I couldn't find anything in the Manual

Yes background

When I say stained, the developer is “adhered” to the mag roller, you literally have to lightly sand it off( I use emery cloth)
Yes it causes the drum to not clean leaving a background in that area.

The mag roller will stain and you actually have to sand it off to get rid of it. It has 48,000 copies on it and this is the second time I've had to sand it.(The first was at 18,000). Using OEM toner...

Excellent news
Thank you

will these work on the 1 series also?

Yes OEM I have replaced the black Drum unit and developer unit, the entire Image unit out of a pm kit.

I have a white void (see pic)49812 in the same area, but only in black. All 3 colors are fine. I've replaced the black developer unit, the entire image carousel, and took out print head assembly to...

When you put an original in adf to scan to computer, green light comes on, it doesn't try to pull originals, but scans from glass.
Copy mode it works correctly. Any help would be appreciated.
Thank...