Search:

Thanks Luca72
I did try slot 2 yesterday and it didnt work. Tried it again today and it loaded......... technology, go figure

Has anyone ever seen this error in a Ricoh? i was updating a IMC4500 through the op panel and right after the op panel optimazation got this E225 error with no instruction on what to do. any help...

I have had a lot of SC819 codes caused by power save. update firmware to latest, firmware all does not always have what is needed. go into the apps on SOP and go to application site, admin menu,...

Load the most recent pcl6 driver for the machine, have never liked the universal drivers. don't work worth trash.


Gary

tech bulletin DAOC-034 there is a warp in the developer housing. Ricoh has a mylar to fix the issue Part# M0AJ3135

First check SC log entries for any other errors showing up. Upgrade your firmware and if still having issues unplug HDD to see if error stops, Could be harddrive but is in most cases firmware

Have you tried from your laptop or another computer? might be worth a try.

Where does the machine show the paper as jamming? look at your jam codes in your logging data. this should narrow down where the machine thinks the jam is.

It sounds like something is getting on the transfer rollers and is making what I call divots poking up causing spots. If the cleaning unit does not work replace the ITB, but make sure if it is a belt...

I have had a piece of paper follow the transfer belt, It caused the print to smear like this. The paper gets just past the top of the of the belt unit and cannot be seen from the side, the ITB needs...