WSD is turned Off, and Airprint and they are using the KX driver.
Type: Posts; User: kuby
WSD is turned Off, and Airprint and they are using the KX driver.
Had anyone had an issue with a customer calling and complaining that the 406ci is now printing in color when it used to be set to B&W from their computers. Customer insisted that THEY did not change...
Not likely anyone would give that to you and risk losing their dealership over that.
Like what Ropariva says. Not going to happen.
*************************************
You can't edit the screen on a P5026cdw.
I know that it may not be possible but we had a P5026cdw that was snatched at a show. It is on KFS and I can see it has run out of a color toner. Is there a way to disable the printer?
**********************************
Ran this 15 times and no change at all.
Already replaced the drum unit, developing unit, transfer belt, secondary transfer roller, cleaned the machine, ran updates, refresh drum and developer, etc.
Have a customer that has a 7353ci that the Magenta has a streak in it. The tech changed the drum unit, developer unit, ran refresh on both, etc. the machine is level, and cleaned. The transfer belt...
Do not using a mobile device. It is happening on my Windows desktop and only when I use Copytechnet.
Is there anyway to block the AdChoices. I have tried to tell it to block them inside Copytechnet and the ads just keep coming up.
Thanks
The model number would help.
Yes cleaned the waste toner area.
Thanks I will try these suggestions and let you know. Yes I have tried the back door as I remember seeing this fix on another machine problem.
Have a new customer that has a P6021cdn that has a message on the screen "Check the toner container". Said the replaced the toners and the waste bottle and the message is still there. Went and...
Did it test out good at the shop before you delivered it?
Found the gear and a motor.
wormwheel drive gear - 302K021480
parts DC motor assy - 302ND94050 (has a different color gear bur thinking it will work)
Found the gear and a motor.
wormwheel drive gear - 302K021480
parts DC motor assy - 302ND94050 (has a different color gear bur thinking it will work)
Yea, that is what I thought.
Is there a parts break down for the DR-8350 (302L793120) drive assy. for the 3252ci. The belt cleaning motor and the 40/21 gear that it drives has some worn teeth. Took motor and gear out of another...
Is there a parts break down for the DR-8350 (302L793120) drive assy. for the 3252ci. The belt cleaning motor and the 40/21 gear that it drives has some worn teeth. Took motor and gear out of...
This is the response it got from support.
Hello and thank you for contacting Kyocera support.
That isn’t a specific machine failure. I did a search and found some references, you might do the...
Yea had that too. And had to go in service mode and change it.
Yea thanks. The tech had plugged in the one wire into the wrong plug. All is good now.
Installed a TASKalfa 8353ci and adding a DF-7110 finisher with a PH-7A. How do I get the hole punch unit to show up? I thought it would auto find it?
Thanks
What BlackCat said.