lift motor
Type: Posts; User: EAHG
lift motor
ATC yellow fail.
Are you a tech and familiar with Xerox
have it once on C75 had a faulty IIT pwb , but you could try first cleaning the IIT, usually after hanging an AGC error code would appear, that's what i encountered
there's a chip model identifier in the fuser just swap it you should be good to go.
things to check.
IBT belt
IBT cleaner
Fuser
Developer
would be also helpful if you could provide some insights on the FIP you've performed as well.:o
Flat Cables. make sure its seated properly after replacing and take extra caution when returning it back as the flat cables easily comes off or loose contact when repositioning, its very tricky.
https://mega.nz/file/9Q0WWAzA#HI0UqOwtrriAWA19W9iHg6I-t0EzJJXgQ-5uNJf3EmY
here hope this could be of help...
https://mega.nz/file/VBllDIzI
it's a bad nvram battery did any power failure happened?
try checking the nvram battery first i have encountered that a lot in that model the fix is replace the nvm battery and reload the firmware...
yes thank you i will try to acquire one thanks guys.
sorry no, Xerox tech before but i change company, now employed in their maintenance section and handling copiers printer....and embarassingly its the first time i encountered a ricoh production type...
hello guys
need some help entering sp mode in rex rotary pro 8200s i have tried (yellow key) 107, 108 (c) and (online) + (all clear). I installed a new cleaning cartridge for fuser and would like...
july 7 2006
you're welcome
you change the dispenser? or you change the toner. there are no codes to reset.
things to check...
1. dispenser motor
2. agitator and toner tube (physically,although you said you replaced the...
Dispense Yellow Broken.
Seito family's annoying problem....could be 3 components.
1. IBT's hvps.
2. Developer housing out of position.
3. HVPS pwb (left side when you take out the cover).
hope this can be of any...
Any error codes mate.
PSW only for that KUTANI family.
try cleaning the IBT cleaning blade.