From my understanding it resets the color registration on the DC Controller as if it's brand new. I'd try that first but have the replacement DC Controller handy.
Type: Posts; User: ZoZo
From my understanding it resets the color registration on the DC Controller as if it's brand new. I'd try that first but have the replacement DC Controller handy.
Open the printer’s toner access door. Press the engine test button (its location varies by printer, check service manual for exact location) for five to ten seconds. Release the engine test button...
I've no idea why it would happen, my initial thought was a job was sent that the machine couldn't comprehend but that seems unlikely since formatting or replacing the eMMc has fixed it for me in the...
Format the eMMC & reload the FW, if that doesn't work replace the eMMC.
That's really bizarre, you would think that the build would be the same. Any chance you could share the information to adjust the skew on the M632? I've never been able to find it within the machine...
I've seen this a ton with the MFP version of this machine. Never been able to find out what the deal is with it, I've had numerous complaints about it and the best I can come up with is an apology....
I've used Seagate 320gb HDD's in these before, after install I do the secure erase (which takes a pretty long time) and loaded the FW and haven't had any issues. I don't know if there's another way...
ftp.hp.com
Liberty Parts Team, I've been using them for a few years & barely ever have a defective fuser.
There's a contact on the upper cartridge guide, is that bent or out of place?
I recently ran into an issue where the laser shutter in the cartridge cavity was broken & covering the laser. Might be worth a look.
11552010
It's the FW, no way to get around it other than using OEM that I'm aware of. Really shitty thing of HP to do.
I also encountered that, well after this thread. Thanks for reminding me!
DC Controller took care of it.
I can't speak for those older models, but, in the more recent ones if the scanner fails it still has the print functionality. You could just disconnect the cable from the SCB to the formatter & see...
Hey Everybody,
I've got an M830 in which tray 3 does not even attempt to lift, no error codes, no noise, nothing. The only error it gives is when trying to run the paper path test the...
Late to the party, new to the forum. The only remedy I've found for this was to downgrade the FW from FS4 to FS 3.9.6.