Search:

Let me know how it goes. Thanks

I have this problem too, even with some Windows 10 pc.
In addition, Windows automatically adds printers that I had deleted because they are no longer present.

For the problem of this post, I...

I have this problem too, even with some Windows 10 pc.
In addition, Windows automatically adds printers that I had deleted because they are no longer present.

For the problem of this post, I...

C Stop

107

Color start

From where are you updating the firmware?
Since some months I have been updating all the machines using the Firmware Update Tool.
Some firmware downloaded from the Ricoh portal (I think we use the...

What's the problem with your machine?Ordering that code from Ricoh (in italy) costs more then € 1.000,00.This CIS is different from previous A0 machines, and currently our channels have no used...

Are you sure you are pinging that MPC305? Try turning it off and pinging it again.
If the machine is not seen by the web browser too, it's probable that you are pinging another device with the same...

I don't know if this is the case, and I hope not, but we have had 5 machines of the 04 series (MPC2004, MPC3004 and MPC4504) where some or all the icons disappeared after a few days.
Sometimes they...

In Italy its new code is 408056 and the list price is about € 446,50.

On the last machine that had the problem, an MP5500, we changed the drum, cleaning blade and developer on 15 February.
Then the problem happened and on the 23rd we had to put a new developer, after...

Hi guys, we have a lot of Ricoh MP5500/6001/7000/7500 series.


Sometimes they have this problem:
The amount of developer inside the development unit decreases and it's attracted to the drum.
A...

I had the same error code in a MPC3003. You can find the solution by following this post:
Ethernet error + SC672-11 with new NVRAM on Ricoh MPC3003

Thank you very much for the indication.
We'll order the cis lamp and start with that.
Will update you when we have any news.

Yes, but the most important error code is C3210, which blocks ARDF DP7110.


The code C7901 only appeared in the working machine when we installed the defective ardf, but it could be a code that...

Hi. We are a Ricoh Dealer but also technical support to a Kyocera Dealer for his customers.
A customer has two Kyocera Taskalfa 3511i with ARDF DP-7110.
One of the machines has the error code...

Hi everyone and sorry for our too late reply.
We thought we had already written but probably it was too much happiness (and surprise) to have solved our problem.

The problem was precisely...

Hello, we are Ricoh technicians with many years of experience and we are writing because we have a very unusual problem.
One Ricoh MPC3003 of our customer suddenly stopped working as printer and...

Hello, we are Ricoh technicians with many years of experience and we are writing because we have a very unusual problem.
One Ricoh MPC3003 of our customer suddenly stopped working as printer and...

Try using the app RICOH Smart Device Print&Scan

Hi, I haven't an IMC300 available in our shop but the procedure should be this:

- Do the "Forced line position adjustment" as follows.
First do SP 2 111 003 (Mode c),
Then do SP 2 111 002 (Mode...

Hi. The wifi you are talking about is that of the operation panel.
It practically works "well" only when the panel is turned on. When the machine goes into standby, the wifi practically is off.
In...

Hi, I'm not a Canon technician but Ricoh. With our machines you can install a second network interface to solve this problem.
Maybe also with Canon devices...