One off requests are always tricky. I agree though, it would be nice to see them, or at least be able to enable an option for it. Kyocera drivers used to have the ability to show a list of users, but...
Type: Posts; User: ihatefinishers13
One off requests are always tricky. I agree though, it would be nice to see them, or at least be able to enable an option for it. Kyocera drivers used to have the ability to show a list of users, but...
On the driver side? Yes. Turn on "Auto Job Control Review" in Job Handling
On the machine side? Also, yes. Turn on Print Release on the machine, and enable it in the driver in job handling. IF...
You mean a BP-90C80?
I'm guessing a clutch is slipping in the ADF
Yeahhhhh, the fusing belt looks pretty rough. Coating is worn off and toner is sticking to it. Could also try to run a fusing clean in System Settings, but I don't think that will help you.
I know this thread is old... But I just have to let you and others know that this series is modeled after a business grade machine, and even the business grade Epson MFP's have weak color quality....
If you were on the server, if it was installed under Print Management, you checked the Printing Defaults under the driver? Or if it was installed within control panel, did you check under Printer...
We had something similar on a monochrome BP, meandering adjustment was out of spec, and we couldn't get it within spec, but it kept making noise only AFTER it was done printing envelopes. We ended up...
This works for a lot of machines thankfully. Here's the original bulletin, there's also a newer one for the Phoenix/Griffin and newer series'
...
Yes, but then you have to go back home every time you scan and reselect it. Right idea, but even more steps
We've sold maybe 2 or 3... Haven't heard anything on them yet, though. I personally hate the interface, how it's Sharp one minute, but as soon as you select anything, it changes to Lexmark. Other...
I could be wrong, but the doc feeder is the same style a lot of others.... Take off the rear cover, and check for paper clips/staples/other metal that could be sitting on the board.
The clips that hold it in are worn out. That top cover and everything on it are trash and break, almost every part of it has broken for us.
Could try backing up the system settings, resetting them back to factory defaults, and see what happens. That's a 3 minute check you could do with the network unplugged so print jobs don't mess...
Sim 43, usually 43-1 is what is needed.
First things first. Did you push a clone on to the machine?
Maybe useful?
https://service.sharpamericas.com/idncservice/BULLETIN/TT-012916_2.PDF
Yes, then you have to also go in to Image Send > Common Settings, and enable the hold address setting. All Sims does is make it visible. Why it isn't an option to check by default, I'm not sure....
Would be really cool if they would stop reinventing the "wheel" and just make them all the same, or maybe 2 kits...
Really not having any issues with Sharp's or Epson's... And honestly, not really on Kyocera much either, but those are getting less and less every day as we haven't sold them in 3-4 years.
With...
Read the rest of my message...
What size flash drive? Gotta be less than 32GB more than likely. You can also go to the service webpage(not the normal webpage), by going to https://IPADDRESS/service_login.html with the password of...
That's a nice diagram... It only tells a quarter of the paper path story... It's missing 3 twists, 2 figure 8's, and a loop-de-loop.
Re: What's your recommendations for a bulletproof / idiot-proof copier for teachers ?
We ended up putting the C/M21000's in a school district near us, and other than the high cap unit feed tire counter of 100k, they're solid. They don't jam naturally like Kyocera's, however, bad paper...