Search:

I have seen the channel. It has millions of views and subscribers. it's very ironic and funny, in the madness of him.

How long do the drums last on iSeries?
I already have some reports of lines on the sheets and drums usually only have 20-30% life.

Thank you! But I don't understand why do 4 firmware for G00-E9? I have "Periodic Firmware G00-E9" and then "Firmware G00-E9 MSG96", "Firmware G00-E9 MSG97" and "Firmware G00-E9 MSG99".
Are they...

Anyone know what these firmware are?
For example in the iSeries there is G00-E9 and then there is G00-E9 MSG96, MSG97, MSG99.
I noticed that these firmware have "Customizations: NO". While the main...

I have seen Dual Scan ADFs that are very resistant to jams. But I have some printers with jams around (66-13).
I have difficulty getting to the sensors in these ADFs. In normal DFs, it is sufficient...

These toners have three/four hooks. With a screwdriver remove the hooks and change the cap. Voila, new toner.

thanks everyone for the support. I managed to get a video sent to me:


https://www.youtube.com/watch?v=93T499yVJtU

In the video it is not seen but the paper comes out of the second tray and...

it's plain 90g paper. I recovered this finisher from a printer graveyard and there is a good chance there is some piece missing or something is blocking the paper.
But without taking it apart, we...

Thanks! The card stops at this point. There is no way to get it through. There is something that is not clear to me
47913
47914

I recently retired an FS-534 with a folding unit. I don't know its history but it seems in good condition. No jams in the two output trays but only when I try to fold.
The paper is rolled up before...

Yesterday I picked up 8 bizhub C454e. Total counter: 80k, 90k, 400k, 100k, etc. so it is not due to excessive use of the printer.
7 out of 8 have these problems:
- Tray 2 jam and Tray 3 jam.
These...

Try running the load checks to see if power is coming. It may have some power problems.

Yes, the code is J2002Thanks for your valuable advice!
Although personally I don't understand why, after cleaning the gray rollers, there are no more jams. Yet they don't look dirty.

I buy several used Series 4 printers. All of them (bizhub c284e, c364e, c454e) very often have one problem in common: tray 2 jam. Replacing the rollers does not solve the solution. The paper jams a...

Under the surface of the drum there is a little roller gray, I believe that in English it is called the charge roll. :cool:
https://crsimagehosting.com/wp-content/uploads/Ricoh-MPC2500-PCR.jpg

yes I noticed a scar in the gray roller under the drum.
It's quite small, I was hoping it was dirty but it actually looks hollowed out.
Thank you guys

Also, where does the paper get jammed?

Hi, I have a bizhub 658e with a perfectly linear black line on the sheet.
The drum is 85%. Last time the drum expired earlier than expected. But this time the line does it from both sides. I don't...

Hi, do you think if I put a thickness of paper or tape, I could solve the problem? It is very similar to your description. I have a bizhub C364e with several 20-02. This happens especially with A3.

In Europe -france- GC2-B6 is considered a bugfix firmware. In case of problems, it is the first thing that the technical team has proposed to insert.

we have seen a big change from the 8 series to the iSeries. What will happen to the C227 series?
It's not a pretty printer but it's cheap, with a good price. I have heard it will be replaced. Do you...

I have a problem with the RAM modules on a bizhub 308e. Konica Minolta suggested I change it but I also have UK-211.
UK-211 and the RAM already present in the printer have two different codes. But...

what's this called in the manual? I am curious to see how to disassemble

thanks for report!

try to check the movement of the tray from the service menu