"I had already checked the HV card, the springs were normal (no oxidation). By "Laser glass" you mean the PH unit Window, right? I will see that. The TCR level is currently at 6.57. Here is the photo...
Type: Posts; User: Nico.FRA
"I had already checked the HV card, the springs were normal (no oxidation). By "Laser glass" you mean the PH unit Window, right? I will see that. The TCR level is currently at 6.57. Here is the photo...
"For a bad connection of bias voltage to the development tank, how do you know?"
"For a bad connection of bias voltage to the development tank, how do you know?
"Thank you for still being there, the counter displays 46,859 copies ... but in reality even less, we were surprised to see that at the time when we were under contract with Konika, the counter took...
" The unit was new and genuine, a real Konika one. I have just one copier and wont have the possibility to try to change the transfer belt to see if it's the problem, thank's for your intervention"
"Thank u very mutch for this post, unfortunately, of "small" technician I did not find in the sector and all the others arrive at the same conclusion: to change material ...... it is thus, with...
"Thank you so much Allan for all your advice, I will leave the site. Unfortunately, the technicians I am brushing up on do not give me the solution and I actually had a lot more interest from you...
"Yes for the quantity, it was ok, for the thank, all new in the box.....but I believe that I am going crazy with this copier, I am now battling with one more problem ..... I launch a print from my...
"Oh oh, [TCR Toner supply] is missing from the menu!!!?, see attached file45242 "
"Everything is exactly as you mentioned"
"Unfortunately already done ( clean the 2 image density sensors) and nothing different.
"Yes, I have already swapped the drum y with the K, changing the chip, no better! TCR k level was wrong, it's now with 6.31%, in attachment the scan of the last graduating test"45232
"Hello, I have already manually added powder to the development unit, nothing has changed. For the rest, we will try that!"
"To answer the two questions, yes, the problem is only on black, and no, no other error message than my original P-9 which is still there! For the settings that you advise me .... i did it, not so...
"Thank you for this friendly addition, I will do my best to honor my presence here!"
"Sorry to bother you, you can forget my thread. Take a look at where I come from, you will also understand why, some terms may seem complicated to understand for me. But you're right, I'm just a bad...
"I carried out a complete cleaning, completely emptied the hopper, reassembled and proceeded to a manual complement via the service mode. After completing the addition, I again removed the K dev...
"I did not try again with another new development unit, the toner is a genuine one"
"Transfer Unit is ok, What does PM mean?"
" Replace a new Dev. K unit, genuine one from konika. TCR level : 4%....but with a full one, also genuine!"
"by dismantling the Assy sub hopper, am i right?"
"It's done, but I'm afraid it could come from the HV unit card"
It's done, but I'm afraid it could come from the HV unit cardIt's done, but I'm afraid it could come from the HV unit card
After the machine gives me the error message "change the toner", a new original toner installed, the toner level indicator always goes low. the PC interface gives 4% while the toner is new. test with...
"Yes, just the black, but what remains strange is that, at the very beginning of the problem, I had changed the K development unit and that the prints had returned to normal, very good quality, from...
"By imaging process adjustment, i did two times a manual toner ad for the black, after that, going into test mode for a gradiant patern for the black......still so bad!"