Search:

Type: Posts; User: SGT_Snacks-64

Page 1 of 7 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    948

    [CQ] Re: MPC3502 Scanning Issue

    I would be looking at the scan size sensors within the flatbed.

    What happens when you scan the same document in a different orientation. Can you provide examples?
  2. Re: Ricoh Aficio 1075 don't remember anything ( IP address, clock) Etc.

    The Battery "should" be on the controller from what I remember. You can test the battery when removing it by running a Multi-meter across the Positive and Negative of the Battery and comparing the...
  3. Replies
    4
    Views
    2,826

    Re: Equitrac multiple print server

    For obvious reasons, PCC requires a constant connection the the CAS/Print server, therefore a disconnection would stop this from working.
  4. Replies
    12
    Views
    1,412

    Re: ricoh mp7500

    Not an MP7500, has an option for "Colour/Auto Colour Select".

    ....... I'm confused?
  5. Replies
    6
    Views
    692

    Re: 3025 jamming

    Agreed, or try flushing the clutch out with Alcohol, see if the problem changes/resolves.
  6. Replies
    11
    Views
    1,264

    [Jamming] Re: Ricoh 2045

    Check the Mylars on the right hand door (below the Transfer unit), I had one just the other day that had warped and bunched up, causing jamming and creases in the paper as it was passing through...
  7. Replies
    4
    Views
    2,826

    Re: Equitrac multiple print server

    Well, it wouldn't...

    If you ran an EQ server from the site, seperately, it would. I have a client that does this.
  8. Replies
    4
    Views
    2,826

    Re: Equitrac multiple print server

    Hi Ferastec,

    Could you just clarify the below:



    We're dealing with 1 print server at head office, correct?

    Not sure if I'm 100% correct in saying this, but if the site office's network...
  9. Replies
    4
    Views
    533

    Re: MPC 4500 Fuser clips

    Agreed with above, if anything, I believe it's a safety feature to stop users removing the Fusing Unit completely (Much like the later models having the metal brackets)....... and dropping it when...
  10. [Misc] .. and quite a few Customer sites (One's I've...

    .. and quite a few Customer sites (One's I've been to anyway) do not allow the use of Photographic equipment onsite (i.e. Camera Phones etc).

    Would be helpful, but not always viable.
  11. [Misc] Already aware of Part Surfer. I use it to verify...

    Already aware of Part Surfer. I use it to verify every part I order. Unfortunately it doesn't prevent the issue of getting an un-reset board through.

    Fitted the DC controller and Formatter....
  12. [Misc] Thanks for the info. unfortunately I have to...

    Thanks for the info.

    unfortunately I have to order through part numbers (Through the Company I work for) and therefore, as the part numbers aren't sepeate between models, I cannot actually...
  13. [Misc] Ah that explains alot. Thank you, Would I...

    Ah that explains alot. Thank you,

    Would I need to replace both now or could I just replace the formatter board?

    Thanks,
  14. [Misc] HP LJ 9050MFP > Shown on Web Browser/Webjet Admin as LJ 9040MFP

    Hi,

    Got a curious issue with a LJ 9050MFP. After replacing the Formatter board, the machine now shows itself on the Web Browser/Webjet admin as a LJ 9040MFP. It's not a big issue, as the machine...
  15. Replies
    4
    Views
    4,058

    Sorry to kick-start a Thread that's over a year...

    Sorry to kick-start a Thread that's over a year old...

    I've had this issue with quite a few 4730s recently.

    When I arrive at the machine, I find the display showing "?" (This is after pressing...
  16. Replies
    7
    Views
    1,981

    As far as I know, you can't limit to a specific...

    As far as I know, you can't limit to a specific amount, you can only enable or block Colour printing for specific users.
  17. Replies
    7
    Views
    1,981

    The RPCS Driver isn't available for the MPC3001....

    The RPCS Driver isn't available for the MPC3001. I believe it's not supported anymore.

    You can achieve what your client wants with the PCL5/6 Driver.

    Create a User Code on the machine in...
  18. [Misc] Don't know if you've tried this, but in Microsoft...

    Don't know if you've tried this, but in Microsoft Office, usually in the Page Layout (or something along those lines) you can specify a Paper Tray from there.

    :\ hmm... My 2 Cents
  19. Replies
    1
    Views
    2,641

    I love anything Barcode ;D Bang on!...

    I love anything Barcode ;D




    Bang on! Pretty much :) I have a feeling the chip does "store" it's count somewhat. I think the fact that you swapped a Cartridge into another machine pretty much...
  20. Replies
    14
    Views
    1,789

    I'd probably agree with you on that one. You'll...

    I'd probably agree with you on that one. You'll be looking at an hour easily for the Laser unit if you haven't done one before (It was the first call I had on one of these models), that's not...
  21. Replies
    12
    Views
    2,456

    [Misc] There could be differences in the set-up of the...

    There could be differences in the set-up of the PC's. - You could always try adding the Driver manually on various PCs and point it to the Printer's IP Address, that would bypass the Print Server...
  22. Replies
    12
    Views
    2,456

    [Misc] Hi Ferdy, Is there anyway to connect the...

    Hi Ferdy,

    Is there anyway to connect the KM-5050 directly to a Computer/Laptop and try printing? This way you can eliminate the Print Server from your diagnostics.
  23. Replies
    14
    Views
    1,789

    Yeah I believe (from an SPC420DN) you pretty much...

    Yeah I believe (from an SPC420DN) you pretty much have to take EVERYTHING out of this machine before you get to the supple nectar of the Laser Unit (And be careful with the Ribbon Cable for the Laser...
  24. Replies
    12
    Views
    2,456

    [Misc] Just a few questions to get the ball rolling on...

    Just a few questions to get the ball rolling on this one... :)

    >Is it a specific document/file type you're trying to Print which exhibits this issue?
    >Are the Printer Drivers/Firmware up to date...
  25. Replies
    24
    Views
    4,432

    I started out in a Training Academy with a large...

    I started out in a Training Academy with a large dealer. I went from pretty much zero to an engineer in about 9 months. Although I had alot of experience with IT and Connectivity etc.

    .......
Results 1 to 25 of 163
Page 1 of 7 1 2 3 4