Hi all I have a Utax 3206 which we just updated to the latest firmware and we find that with job accounting on, and with accept incorrect pin number set to "on" the machine rejects incorrect pin...
Type: Posts; User: charge leak
Hi all I have a Utax 3206 which we just updated to the latest firmware and we find that with job accounting on, and with accept incorrect pin number set to "on" the machine rejects incorrect pin...
I have one , how can I send it to you ?
Hi
I have had this problem many times, I usually spray with a plastic friendly switch cleaner, and blow it out with spray can of air, it usually works.
Hi all,
Have any of ye used the Taskalfa 8350 drum rebuild kits. These kits come with, drum, blade, charge roller, charge roller cleaner, but without drum chip. Has anyone been able to source the...
Most of our fusers do 30-40K then they have to be replaced, I once asked a very senior Kyocera technician " Is there any way to prevent fuser jams in these machines?, his reply "don't switch them on".
RTFM. Sorry ,I didn't see the service bulletin re the modified developer units.
Hi all, has anyone discovered what is causing the black developer units on the Kyocera Taskalfa 2552, scoring the black drum units, we have had to replace quite a few developer units, and drum units,...
Thanks so much for your help.
Charge Leak.
Thanks for the prompt reoly, its a stupid question I know, but what is the required size ? yes the screen size.... The lunatics are running the asylum...
Hi all, does anyone know how to put our company logo onto the home screen on the Taskalfa C2553 machines.
Thanks in anticipation
Charge Leak.
According to kyo tech, the latest firmware reduces the rotation time of the fuser, and also the length of time the fuser is at a high temp, I have rebuilt some of these fusers, with grey market belts...
I have rebuilt both fusers with Katun belts, takes about 1.5 to 2 hrs, I haven't had a problem with any rebuild yet.