Search:

;) so my comrades , the cable was the issue , there was no visible signs of breakage ,funnily, it appears that the factory tie straps that held the sensor wires together was where the breakages were...

i exchanged that sensor with two i had, same error

i replaced the entire fuser unit, i now have 2 the old and the new . same j018 error. you same engine you were referinng to the ruser roller motor right? . i took the back off and noticed that it...

it jams everytime for all papers

thanks i will try that an get back to you

:confused:hey , good day i keep getting error J018 with a Mp c3503. in my case the paper keeps stoping at the fuser entrance(copy or print same error, i had a bad fuser film initialy , got a rebuilt...

will do, my bad wasnt quite sure how the thread thhing worked

:confused:hey , good day i have this same error J018 with a Mp3503. in my case the paper keeps stoping at the fuser entrance, i had a bad fuser film initialy , got a rebuilt one that only worked for...

check the lamp strips on the reader unit, ensure that both are getting power or lighting up / properly conected .

the hard drive is usual locked when placed into a canon machine , is there away for me to format it and use it in my pc, i place a normal one in the immage runner c5235a also and it locked it, pc...

lol, embarrassingly i dont know how to start a thread

i did that , download moad only chanegd from (HDD) to (USB) with limted options , i get error when i try to to formatt all , and error when i try to back up sdram

i have a canon image runner c5235a that is only showing limited options in download(HDD) and(USB) mode, and giving me SramImg.bin error when i try backing up sdram , and format error when i try...

question ..... What dose an unrecoverable imagerunner (eg. c5235a, c6xxx etc) machine look like? could you send me a picture, what are the symptoms of an unrecoverable machine.? and can you just...

question ..... What dose an unrecoverable imagerunner machine look like? could you send me a picture, what are the symptoms of an unrecoverable machine.? and can you just purchase a comple used...

what is your website?

yes my friend, i think u found your problem , main board would be most likely dead with that chip toasted :D , check power related pcbs and power supply for defects before insertion of new board....

after installing the correct pcb 1 , i began getting error code E602-0001:p , i noticed there seems to be an error or fail every time i attempt to back up or download data via sst or usb in download...

SramImg.bin keeps failing whether i am trying to upload or download ,in download mode

Check the hdmi port on pcb 1,
are all the lights on the main controller boards on?

[QUOTE=teckat;827532] where can i get a Flash ROM PCB to purchase for a canon ira c5235a , after a pcb 1 swap from fmx xxx xxx to a" fmx xxx(001) the correct serial" because of a e355-004 ( board...

i have an imagerunner advance c5235a giving the same issue , where can i get a flash rom for my model ?

4610246103
greetings from the island and .:)thanks for your reply , for the c5235A initially i changed pcb 1 as the hdmi port for the panel was damaged ( on changing it i on booting up i kept...

i just bght the firmware from the proposed link ,with usb inserted , i only see the option to format drive (option 4) , when selected it says, ( formating HDD ALL ERROR the machine seems to be...

i am a computer tech , i have one of those c5235a with the same issue , will purchase firmware if i have to:rolleyes: , can any one assist me ?