Sorry everybody, forgot to put what what model - Xerox Nuvera 100 EA. During the Xerographic Check in Diagnostics, it is failing at the "BTAC Charge & Developer Checkout" part. All the Charge...
Type: Posts; User: DT Xerox
Sorry everybody, forgot to put what what model - Xerox Nuvera 100 EA. During the Xerographic Check in Diagnostics, it is failing at the "BTAC Charge & Developer Checkout" part. All the Charge...
Hello all, what sort of image defect is this in the attached picture? Also, attached is a picture of whole bunch of dry toner that was in the front of the xerographic drawer.
Seems the fuser roll was the culprit. Changed it out with a new one. Also, changing those 6 stripper fingers for the fuser roll was a bear to figure out at first. Thanks for everybody's help.
Looking for a used/new Stripper Baffle Assembly (part number 055K36980) for Xerox Nuvera.
Update: It was not the pressure roller that had that band, but the actual fuser roller. I was mistaken. One of the ends of the stripper baffle assembly that goes in an inside track behind the fuser...
Do you think this band on the fuser pressure roller (circled in red in picture attached) could be the culprit? The band is located on the back of the fuser pressure roller (towards the back of the...
Hello All, we have a 10 year old Xerox Nuvera 100 EA that has been giving us a banding defect on the bottom edge of all prints (pictures attached). I'm not sure what is causing this, here is...
We got the Nuvera back up and running for the time being. It turned out it was a bad PR Tension Motor. Thanks everybody for all your help on here, especially Milo & Adi!
Thanks Phil, good suggestion. Just contributed. After searching past posts for a manual request for a Xerox Nuvera, I did find this one for a Xerox Nuvera 120 (very similar to the 100). It looks like...
Thank you so much for the reply. We would love to purchase a service manual. Do you know where we can we find one for purchase?
Hello all, new to the forum here. We have a 10 year old Xerox Nuvera 100EA. We just started getting Print Engine Module fault code: PEM-09-4320. We are trying to get a couple more months from this...