Hi there,
Apologies if this issue has been asked and solved before but I couldn't find any references after searching here.
Long story short we've recently had 2 new Riso MH9350s delivered...
Type: Posts; User: richsouth
Hi there,
Apologies if this issue has been asked and solved before but I couldn't find any references after searching here.
Long story short we've recently had 2 new Riso MH9350s delivered...
Thanks for getting back to me,
Fortunately I managed to resolve this issue in the end, but I suspect out problem was different. I basically went over every part of the first feed mechanism,...
Hi there,
Wondering did you resolve this issue? I'm experiencing the exact same issue on an mz770e, I've also checked the sensors and installed a new clutch but with no success.
Hi there,
I'm running a RP3700 and I've always printed via Risograph MZ drivers on Mac OS X, it works pretty well but occasionally has glitches through the print.
To get around this I've bought...
Ok so after some helpful advise from a facebook group, I may have isolated a faulty flyback switching regulator, serial number STR_G6153 on the power assembly. Their advice was to warm up the...
Hi there and apologies for writing in the dead thread below.
So in short I have a Risograph RP3700 and for the past month the machine has been taking minutes and even hours to switch on. Once it...
Hi There,
I'm experiencing the exact same issue, I've tried changing the power assembly with no luck. Just wondering if you manged to resolve this issue.
Rich