TCR levels for other colors CMK are approx 6% except for Y which is approx 3%. I also swap a Y dev from a working machine but the TCR-Y level does not increased.
The total meter of the copier is...
Type: Posts; User: Francisca
TCR levels for other colors CMK are approx 6% except for Y which is approx 3%. I also swap a Y dev from a working machine but the TCR-Y level does not increased.
The total meter of the copier is...
I did swap the Y toner adding shaft and the gears from a working machine and also i did what you've said and yes the shaft/screw does turn.
So i think its something to do with the sensors for the Y...
Thanks for confirming.
Hi guys,
Is there any dip SW for resetting the toners of a C554e.
There's no error codes displaying but it keeps on saying Toner (Y) is low.
Also in the service mode>state confirmation>level...
Hi all,
I have a DocuCenter -V C3375 which is making a lot of noise when scanning and copying on DF.
Have checked the rollers and sensors and it all seems ok.
Your ideas may help.
...
Hi guys,
My copier C364e have been producing some unusual grinding sound when doing color printing.
With mono it has been printing fine without noise.
I have checked and cleaned the transfer...
I'll try do that....
Thanks very much.
I was thinking it could be one of the switches so....
Thanks very much....:)
Hi guys,
When log in to utilities,counter etc.it ask me for the administrator password.
How can i remove the password request?
I would only like it to be in the Administrator Settings .
I...
I have checked the service mode and found out that the HDD was uninstalled so I install it and now the control penal is not freezing any more, it printing ok.
I'm yet to install the firmware.
...
Hi guys,
I got a C554e which the control panel freezes when i'm trying to print out the meter count.
With the demo test page and the config page it does print well.
I did unplug and plug in...
Hi guys,
I have this error code -CF902....and its something to do with the SIO receiving port...ENG
I've checked the MFP boards and all its cables are correctly plunged in.
Could you guys help...
I've tested the continuity of the components and found out that its not the N38. Its the F103 which is faulty.
I'm going to replace it with a new one.
This would help save the cost for buying a...
I have able to figured out the fault with your tips.
I've swapped the high voltage board (HVB) from a working Konica Minolta C364e and the copier is printing okay now.
Thanks very much for all...
I just swapped the flat cable that connected from the MFPB to the PH unit transfer board from a working KM C-364e and its now working okay.
Thanks for your response.
Hi all,
I have an error code C-5603 which is the extended communication board error.
I have swapped HVB, PH unit and expansion board from a working Konica Minolta C-364e but its still...
Yes both print and copies.
Ok.
How could you expect me to print the demo page test 3 times on the user level.
When i'm actually having problem with the blank print outs and copies.
I did print the demo test and meter...
All colours are missing.
Yup, i did checked the transfer belt and the imaging units but there's no images or even toner particles on them .
Thanks
Hi guys,
I have a C364 here, giving me blank print outs. I did replaced the solenoid but it doesn't solved the problem.
Please could you guys help give me some tips on this.
Thanks