Your pdf printed copy looked good what format did you print the non pdf in?
I see a lot of speckling (black dots).
Your best bet is to call a service company near you to evaluate the copier for...
Type: Posts; User: 40yearsplus
Your pdf printed copy looked good what format did you print the non pdf in?
I see a lot of speckling (black dots).
Your best bet is to call a service company near you to evaluate the copier for...
Try downloading the Mopria App or other printer apps to print from phones. I can access all my printers from it and it was free for me hope for you also.
They have to be on the same wifi but its...
Yes it is FAT 32. Thanks
Great tsbservice and others.
Ill check those things tomorrow Thank You.
Add any other ideas in the meantime !!
Thanks tsbservice, I have 2 problems and the original one is my usb front port does not read. He suggested upgrading the firmware but my firmware port does not read or see anything when plugged in. ...
I am plugged into the proper usb slot in front.
The cable goes to USB 1 in the controller.
We tried another version of FW that failed would you be able to refer me to to a copy of this firmware you stated to use?
Does the FW upgrade allow you to reset the version after the firmware...
I have a KM C284e that I have turned all the front USB settings to read and scan to in Admin settings mode.
Although the USB port flashes the Thumb drive light, it wont recognize anything. Also...
The chip on the fuser counts its life and keeps it.
All I can think of is you can go to the customers and try the unit. Also compare the fuser picture to a picture online here is one I found at metro fuser they are great people.
41X1115 Lexmark...
I have troubleshot all for this code and seems like the majority of problems replace the IHPU Board.
My question is that the IHCoil is 600.00 or so. Do any of you have any luck not replacing this...
Think you may need to call a KM service company. This sites for Techs or those who donate to the site. Its not an easy troubleshooting process if you are sure you put the proper toner in.
Many Thanks to TSBservice for the private message response and simplifying this for us.
Anyone with this problem his response was after logging in to service mode, use the following keys to get...
Im having trouble getting into enhanced security mode. I got this far from the Konica User Guide
[Administrator Settings][Security Settings][Enhanced Security Mode]
When I get to the...
Thanks ill try these things tomorrow.
HI TB Thanks,
What will the service switch do for the unit. Ill look for that in the manual. Thanks for helping!
I have a KM C458 that actually ran out of cyan toner in the field. When I replaced the toner the cyan tried to refill but could not or said replenish cyan toner and the color slot that shows no toner...
Thanks TSB will try that ! Also the man who said print control board this is the mfp board the ncu is hard soldered too.
Thanks Ill update this when i get back they have a xerox small loaner...
Hi TSB Service I can get firmware although can I install it in just a Boot Mode by turning unit on in a with thumb drive in certain Port, Also does the thumb drive have to be below 2G as in adding...
I read you said it was not packed id you replace the itb unit yet. Sorry if these are off topic and you tried them.
Not an expert on this but it sounds like your waste auger is not moving or driving if you have found its not clogged already. If I read your post properly check the waste auger drive.
Don't rotate...
Hello all,
Here is my info I have a KM 364e that will beep once on main power switch on then after a couple seconds cycle all copier Drive funtions with the first half tone screen in display. Then...
I have not had to do this but it sounds like it is worth a try since you are probably doing it to save money.
You can always revert back and put the other board in if its giving you any type of...
Here is one I saw on a Parts dealer site we buy from if you feel its any good.
Technicians Vacuum - Omega Supreme Plus Electronic Vacuum Kit by Atrix(R)
The company is reputable and I have...
Could a Xerox tech help me with a part number for a 5735 Xerox ADF Part number please. No tag number except 150 is filled in, one hundred fifty. Tag 50 is not filled in on cover.
If...