Ready Mode
Hold the home button for 7 seconds (Black / White screen with 4 rows should appear)
Hold the bottom row for a few seconds (Maintenance mode)
Login with * 2 8 6 4
Use Maintenance...
Type: Posts; User: CroceL
Ready Mode
Hold the home button for 7 seconds (Black / White screen with 4 rows should appear)
Hold the bottom row for a few seconds (Maintenance mode)
Login with * 2 8 6 4
Use Maintenance...
You only need usb drive and the firmware
From the service manual:
Afterwards:
Maintenance Mode 61 - Touch Panel calibration
Maintenance Mode 01 - Init. EEPROM
Maintenance Mode 74 - Country...
Sharp contact told us with the release of Sphinx/Griffin/Phoenix (2630/3060/4070) we shouldn't do 25-02 anymore on first start up.
Since then: (same for new Titan/Atlas)
Delete all Startup...
Problem with the Scanner unit / mainboard
Easiest thing you can try yourself is an error reset.
Start up the machine
Look if you're in copy mode in the top left corner (Just ignore the error...
Duplex only works with A4 on this model.
Did you set A5 on the printer itself aswell?
Are you just blocked from the Admin / Service Webpage or on the machine itself aswell ?
Here
File is available for 2 weeks
Watermark FW or Normal one/DSK ?
Check the drum unit, sometimes a little bit of paper gets stuck to the drum on these models and pulls out Developer.
Had the same just 3 days ago
Probably fixed by replacing the "ADF Sep. Holder ASSY"
Parts Number
D001R9001
Happens quite regulary with the "latest" models from Brother
There shouldnt be a softswitch, if you really think it could be a Softswitch you can check the 22-6 printout, changed SWs are marked black.
Make sure the machine is completly powered off and not...
59607
Yes it will still print fine from USB
Here (7days up)
Maintenance Mode 01 is full reset
Maintenance Mode 99 afterwards for reboot.
You could also try Network reset in settings.
Did you try to print with USB? If that doesnt work either there could...
58840
Like others said check if the firmware with TLS support is installed , the MX-M283 is most likely already up-to-date
Most likely faulty power outlet.
Try a different one if possible
Update to newest firmware
SIM 55-1
SW32
Bit 6 from 0 to 1
This setting prints out a fuser cleaning page every 5000 prints.
Since I've enabled this on multipe machines we have way less...
Try Maintenance Mode SIM 76-4
If this doesnt fix it you'll most likely need a new printhead.
Create user that has everything allowed, save the number in the driver so the customer doesn't notice or has to input the code everytime. (Every PC same code)
And for the machine create users as...
Yes your pic shows up
MXFN29_pg.pdf (includes FN28)
"0JEC3203511//" is the old part number without modifications, perhaps you got an older version parts guide.
Unless Finisher are different...
0JEC3203511B/ (SHIFT TRAY:EXIT)
Page 96/97
No no I meant my picture is useless not yours :D
But sorry I have no way either to get an older firmware, I the printer still under Brothers 3-year warranty ?
57142
Edit: Welp that picture is rather useless ^^
1. Press & Hold "Home Button" while in ready state.
2. Press & Hold the blank field at the bottom
3. Enter Maintenance Mode with * 2 8 6 4...
Here (expires in 7 days)
If this one doesnt work I can send it via mail
Should be the same as MFC-L5700
1. Open Front cover
2. Press and Hold # for 5 seconds.
3. Choose Toner version
4. Done