Hi dear,
1 million copies?
It seems too old for a new refurbishing way, so my opinion, if you don't want to spend a lot of money for a MK and other components:
use it for spare parts.
If...
Type: Posts; User: fatduke
Hi dear,
1 million copies?
It seems too old for a new refurbishing way, so my opinion, if you don't want to spend a lot of money for a MK and other components:
use it for spare parts.
If...
Hi,
I will compare with another soon as I can but, every time I change something on paper cassette, I make a pic in order to avoid mistakes :-)
But it seems all ok as I remember.
Right now...
Hi
I had similar trouble also with TCR issues, I changed DEV unit too.
Hope it could be useful.
Cheers
Hi everyone,
just came back for holidays, so for this trouble the fix is the following:
13. Date & Time Setting/Time Zone Setting
(Service Mode)
(1) Display the Service Mode screen. (For...
I agree, also transfer roller.
Can I disagree with that?
I use chips expecially for drum unit (only some series) after gradation test (C-M-Y-K), if status seems good I use them again for a few months so I save a lot of money...
Hi,
like said before by colleagues, it could be transfer belt unit trouble. Just pull it out and see its status, also consumable expiring date.
Cheers
Only in scans, but I will update the post with fix 'cause I contacted the dealer.
I had a similar trouble with another machine with same blue lines months ago.
Called my dealer, gone trough KM Tech Service and was a CIS problem, fixed by them.
This is why I don't believe in...
FIXED!
I opened the ADF, the problem was the first solenoid on the left.
Just fixed it with black tape on the old adhesive and fixed :-)
Cheers
Hi!
What about consumables life?
Had similar issue with that and after refurbishing DV unit with powder and reset chip I fixed it.
This is my opinion.
TY
Here you are, the copy sample with blue lines all over the paper sheet.
TY
Hi everyone,
just recall a 1 year life C3350i with light blue stripes when scans from ADF glass or ADF.
HD formatted, new setup from the beginning, setup correct date and time but no luck.
I...
The bottom piece is bend for the try. If i pull out, gears work.
Hi everyone
I got this annoying problem with 5835 ADF paper Jam.
I removed all ADF parts and cleaned it. Solenoids works correctly, I removed dust and toner residues but it doesn't work.
I...
UPDATE
I FOUND THE PROBLEM BUT NOT YET THE FIX
Hi everyone,
I made it (half way), so...
I found like I said before the problem... gears slides too much but if i pressure the gears and...
Hi everyone,
I got this issue with a C308 (nearly 700k prints).
When machine starts to print something it comes out a grinding noise up right in the exit section and on pics attached I see that...
Hi everyone,
I'm looking for DK-6306 Black Drum Unit Parts list for Kyocera 4501i, anyone can help me?
I'm searching it 'cause I would like to refurbish one of 'em.
I surfed the web but no...
Hi thank you first for your big explanation but I checked certificate, no one inserted, created new one, checked the security voice about "from address ADMIN", but nothing...really I dunno what to...
I did it. No fix.
TY
Hi,
machine email address, either for counters and scan to email, have the same address used for testing.
Now I'm trying through yahoo mail, but the machine when I try to scan to email, said...
Hi pal,
for my own personal exp, you can't do the trick of CMYK on K drum like past series (chips included)
I had trouble and then on this 8 series you need to buy original 8 series colour drum...
Thank you pal for suggestion, any free software or only licensed one?
Unfortunately I tried different email providers but had no luck!
TY
Any suggestions about email provider I can use to?
Hi everyone
I will try the fixes suggested and I will update the post!
TY :-)