Search:

Rather than fix this machine--for the money that it would cost--we decided to just buy a new, smaller unit. Our needs don't demand such a large unit. The only reason why we had this particular unit...

that would be great. The only problem is I need to figure out how to replace just the flag. I haven’t been able to tear it down that far.

Here is the picture. The yellow circle indicates where it broke.
46048

I actually cleaned the sensors on the machine behind the fuser..there are two. I cleaned them with a lint free cloth. That's when I re-read your post and found the sensor on the fuser and the broken...

That was indeed my problem. I decided to leave the spring and broken piece off just to see if the noise and error message would go away and they did. Now the thing jams every time I go to print and I...

I believe to have found the problem. The little "tooth" (?) That goes underneath the exit sensor with the little spring broke. I am going to try to repair it and see if maybe that solves the problem.

Phil I agree with you. I am very hesitant on diving deep into this because I don't want to get caught in a situation where I bit off more than I can chew. I am almost positive at this point that...

Inspected and they looked OK. Made sure everything was connected and secured. I even cleaned the sensors up a little bit and it is still doing the same thing. I have very little desire to dig deep...

I have a Toshiba 2330c copier/printer that I am having issues with. It all started with a simple paper jam..the machine ate 3 papers at a time rather than just one. Pulled the papers out and ever...