Well Toshiba always send those same steps on bulletins as their previous wire tie vendors used to be pretty sharp on the edges and definitely would create issues, however I thought that problem was...
Type: Posts; User: MarioTech
Well Toshiba always send those same steps on bulletins as their previous wire tie vendors used to be pretty sharp on the edges and definitely would create issues, however I thought that problem was...
Pinched wires from factory, that's a great start I'd say! Good catch!
Thank you very much FuserNoob, that's exactly what I was looking for! I was about to call KM to get this but they can be quite challenging to persuade when providing information for smaller...
Hello guys,
thought I'd reach out to the community after finding out KM removed the firmware and all documentation on the C759 series for everyone or maybe just independent...
That's correct, however a used board can be used after scrubbing it with the TAR file KM provides however it did not work this time. Needed this unit up and running today to avoid a loaner, passed...
It's a FD69 original code, and as a consequence of this code it's throwing a HDD DC30 but I won't find out if the HDD is damaged until I replace the new main board. Bummer as this copier has only...
Thank you but I did get the TAR file already, it just doesn't work to reset the current board on my shop machine. New board ordered and probably that'll be the end of the error code which happens to...
Hello guys,
have a client that needs the MFPB board replacement, I have a low meter unit same model I'll be taking it from however Konica doesn't provide the reset tool for used...
How many prints on the unit? I've seen several dev units lock up on these newer models and Toshiba came out with a new dev unit upgraded on the plastic housing. Another thing to look at that will not...
Awesome thank you for sharing!
That works fine with Kyoceras as they are mono component, when it comes to carrier like Toshibas it'll not work as it has to blend in with the carrier and create a toner/carrier mix with proper...
By now I believe you took care of this issue, but on these models the bushings lock up on the shafts that move entrance system. Lubricate them and move the manually both ways until it feels smooth...
Mac It's not possible on newer models to do this, the money you save on generic toner you will burn on washed out developer material and hours of cleaning the depleted toner plus developer inside the...
Like you said, for now it will. If the unit has over 250k on those models pay attention to the 2 side paper guides with flattened spots right outta each tray. Those as well as the actuators have to...
Changing/setting of the service password
(1) The [SETTINGS] screen is displayed by press [SETTINGS] on [FS Menu].
(2) Press [Service Password] to change or reset the service password.
Let me know...
Hello everyone, thanks in advance for the help here!
So like the title says, I installed a Kyocera Ecosys M6630cidn a few weeks ago and a couple of days later the optional tray came in as the user...
I agree with the other techs, put the test probes on drop and run it, could be it's dropping too low or the cables are messed up. I had not too long ago a similar problem and over the weekend the...
Correct always had the 15 or 20 amps ESP surge protectors, never installed a single unit without one of those. I agree with you in regards the HDD, but the Main board was a bit of a problem as just...
Dave another device is picking up the IP of the copier, like the guys mentioned on here. It could be a phone, the Nest Ac remote, anything. The best solution is to pick a new IP, make sure it's not...
Hola Dieguito! Looks like the paper doesn't have enough body to support the speed, a lot of paper dust piled up on those reg rollers, the one thing I can suggest is increasing the transfer voltage so...
I'm glad you are looking into KM's, I suggest you work on a business plan based on Phil's questions posted on the forum as I know their quota can be challenging depending on the structure of your...
I agree with blackcat, I can add the fuser films on the console units won't last as long as manual says, so stock up a few of those and the oil that goes inside as well as the felt are critical for...
I agree with the rest of the guys, however I only see developer on the front side of the drum unit. Did you vacuum the rest or was it only piled up at the front? I see a line on the drum as well that...
After OS update SMB is blocked as OS detects it as a threat, most likely the OS's that aren't working are Pro version of W10. Enable SMB protocols, restart the PC and then try to create the shortcut...
I probably should've said genuine, I just called him and he says it's genuine Ricoh toner however you are correct he did not buy it from me as this is a new client. I'll inspect closely the pump and...