I also think it's possible, but you have to find a type of SSD that has the SATA III communication protocol,
because that's what is in copiers.
The new SSDs communicate in PCIe, NVMe, etc. modes....
Type: Posts; User: Jumping Jack Flash
I also think it's possible, but you have to find a type of SSD that has the SATA III communication protocol,
because that's what is in copiers.
The new SSDs communicate in PCIe, NVMe, etc. modes....
Jesus, are you the service manager?
Good luck in the New Year
This link is correct
https://lms.konicaminolta.com/license/km/support_mng.aspx
Hi Hans,
You don't need to have an account or register to get a license for LK-XXX
https://lms.konicaminolta.com/licensebus/km/support_us.aspx
...
I also want to ask why you are here - in this forum.
I have accounts several technical forums from as many different fields as I can.
Most of the threads in the CTN forum don't explain anything. ...
What do you not understand?
See your colleague BillyCarpenter's posts on politics.
My country is not the best, but we are technically advanced.
Unfortunately, this forum is simply weak
Sorry, but I have to ask you,
did you get the forum wrong?
Are you talking about politics here?
Did you join in 2020 and write 880 posts, do you have ADHD?
I have not become attached to the forum and I am rarely active because it is weak. For 10 years, I only have 45 posts.
I don't usually reply to emails.
Anyway, this conversation leads to nothing....
Maybe it's some kind of mutual adoration company?
And I think this forum is weak, half pretend to be stars and the other half go to space somewhere.
Maybe you will stop insulting, create a Team
I think "kmuserpl" and "Copier repairman" are the same guys
This is a scam, the device does not repair anything and does not harm the meters.
Hi,
C-D010 and 011 errors mean that the device has lost communication with the HDD.
You may have disconnected the cables before turning off the HDD in CE mode.
I also do not recommend deleting...
If the sub power is blue, you should wait even 15-20 minutes
Hymm....
Plug in the HDD and press / hold "reset" on the desktop and Power ON.
After a while, "Trouble Reset" will appear on the screen - select and turn OFF the machine.
Try to upload the...
I agree with "Toxic" , always 1 copy or printout after coming to work
How did you disconnect the HDD,
did you select uninstall in system 2?
A 250GB HDD must be connected when uploading FW
If for a reason you have a misfeed like in the picture, the reason may be wrong paper control in the output section. this solution usually checks, the electromagnet and mechanism are under the desktop
Maybe this information will be useful to anyone.
You can try to fix the HV by replacing the components marked N38 with new ones.
They can be measured and checked as a fuse.
The machine checks the coverage on the transfer belt every 3 prints.
warnings give information if the cause is a laser.
Does the machine display any warnings? type P9, P28 ... after testing.
If so, then probably the HV Unit is damaged
Mike, this is not a forum where fairy tales are told
Print the demo test 3 times from the user level and check if the machine reports warnig
Correct memory should be so-dimm SDR (SDRAM) 256mb 2XR8.
Another one will not work in this copier, so don't try with DDR.
All you need is one memory in slot 0.
The only question is why you change...
You still have to upload any FW.
I propose AA2J0Y0-F000-G00-23.exe