just a follow up. Thanks again Rusty Harris! The ccd side of the lens was dusted, cleaned it and the ccd, faded copies are gone!
Type: Posts; User: billmcwho
just a follow up. Thanks again Rusty Harris! The ccd side of the lens was dusted, cleaned it and the ccd, faded copies are gone!
this machine is copying light on the bottom of page. The prints from the computer are fine. Doesnt matter if you run off glass or dsdf. as far i could see there are no baffles to change the amount of...
customer wants to send print jobs to the 3055c when not at the office. TIA Bill
have a customer that the copier cycling every minute is annoying. Is this cycle interval adjustable? TIA Bill
looking for firmware for the okidata es9475. Machine is equivalent to the toshiba es5055c, however the firmware is not the same. TIA Bill
is there a part number for the thermistor or is it not sold separately. TIA Bill
rebuilding a fuser and there is a woven nylon pad that is really mangled. has anyone rebuilt one of these and just removed the pad?
getting jams out of the fuser, machine has about 120K. get a 4211 code. pulled the fuser cleaned the sensor (had very little dust) Is there a way to check the sensor without replacing it? The press...
thanks for the info!!!
what is the procedure to calibrate the panel. TIA Bill
Thanks for all the input!!!! doing the 03/235 the back half of the LED was not lighting. replaced it and now getting a better look at the old assembly R3 is fried.
one more question is why did this...
I lost power during a firmware update on this model and it blew out my system board!
I replaced a black dev unit on this machine at 467K. drum was shot and copies were streaked and spotted. I will admit i cheated by replacing it with a low count black unit from another machine. That...
I did enter the 10871087 and set 130. when you say it will take a really long time, are you suggesting just let it run? from the feel of the toner it has taken close to 1/3 of a new cartridge.
replaced the maintenance kit and now machine just keeps adding toner. Must of done something wrong was working prior.
new to the forum,I am also in need of the 3508a firmware. Its actually a 5008a. Lost my access to the toshiba fyi site. Any help would be appreciated. TIA Bill