Thanks. Wouldn't think it would be something like that with such few copies, but will give it a try.
Type: Posts; User: CopyTech03
Thanks. Wouldn't think it would be something like that with such few copies, but will give it a try.
Has brand new roller assemblies
Have a M6630, when the paper tray is full it works fine. When it gets below 1/2 full it will indicate "No Paper in Tray 1". Sometimes I can open/close the tray and it will feed a few sheets then give...
I did
Accurio Press c3080 with SD-506 is giving Replace Saddle Stitcher Receiver message and indication when it was just replaced and counters reset. Anyone have any ideas how to clear the message?
You helped me out last time with this configuration. Now he wants to add a FD-503 for the post inserter option. Would it would with the current configuration and if so where would it go, or would we...
In Paper Port I am able to add the TWAIN scanner (MFP) that shows up in the list, but when I go to scan it says Cannot Connect To Scanner. Tried rebooting PC, restarting MFP, and swapping out USB...
Have a c7000 where the fuser has drive, but the upper and lower lamps do not come on. Customer has another fuser that works in the same machine so know it's not a board. Any ideas?
We purchased some 981YC cartridges for these printers, but getting an incompatible message. I just noticed that the "C" cartridges are for Managed printers. Is there any way to change or update...
Thanks, that was it! Just needed to remove that 3rd RU. Now just need to figure out the jamming issue in the LS
There are 2 MK-737 installed. Now I am confused. according to the main manual a RU-510 would be installed after G2, but according to these installation instructions there is no RU-510 installed...
Was able to get the machine to recognize all of the components except it is showing Please confirm power cord and door of RU. I am assuming it’s referring to the 3rd RU in line since that is the one...
I saw a different page but similar. According to this I should have the accessories in the correct order. Must have at least the GP-2 not connected properly.
Customer bought this machine online with numerous finishing options. The manual does not list which order to set them up. They are currently set up in this order after the main body: RU-518, IQ-501,...
New 5054ci with 1000 sheet finisher getting j-6411 and j-6111 jams. Sometimes can run 200+ copies/prints before a jam, but once it jams it will jam evry few prints afterwards. Has latest firmware. No...
Reinstall original boards to hopefully get rid of the 180 error. The c6250 is fuser drive, you will need to replace the fuser drive assembly.
The last jam it had was a 1001 (bypass jam), but it was cleared and now still shows a jam in the middle or upper part of the machine/side door. The power has been turned off/on a few times bat never...
It just shows the jam but nothing there
c451 has the O showing jam on the right side (the O is showing up on the screen between the lower front door and upper front door). The sensor by the paper dust collector is clean and working in test...
Have it off the network, but still getting same code when printing out internal prints
HP m605 with an error 49.38.0d. The printer will come to Ready, once it prints out a print job or internal print (Configuration Page) it will give this code. Starting happening after a power surge....
I have a HP Pagewide Enterprise 586z that is leaking ink from the supply reservoir behind the ink containers. Would anyone have a part number or know where I can find a replacement assembly? It is...
OEM extra high yield
This model uses an ink collection unit which was replaced recently
Anyone know what would cause ink (cyan in this case) to just drop onto the paper in the paper tray? Does not do it consistently, maybe every other day