I spent a good portion of the long weekend taking the whole thing apart. I went though the service manual and did all the adjustments.
got it running somewhat good, enough to get by but i think i...
Type: Posts; User: nprint
I spent a good portion of the long weekend taking the whole thing apart. I went though the service manual and did all the adjustments.
got it running somewhat good, enough to get by but i think i...
pad didnt look to worn, just a slight depression. I flipped it over hoping it helps.. doesn't flutter but still pulls paper 3-4 inches and jams
feed clutch was clean, one way timing looked good. cleaned paper sensor
total 800K copies on machine, feed wheels and pads replaced less than 5k ago.
thank you for the pdf, I will see if i can figure out what the problem is. also noticed i am getting a fluttering...
J8 is what i see
I have 300K on the machine, new pickup rollers and stripper pad
Good evening everyone, I am having an issue where the machine pulls the paper in about 5" then stops and says jam.
I was told its the timing but i am not sure what to adjust, i have the service...