thank you
Type: Posts; User: banginbishop
thank you
I’ve actually mellowed over the years we’ll sort of😂 still can’t stand lazy coworkers though!
I actually don’t see a future for this industry as it’s getting smaller by the year. It’s all going...
sent you a private message
It’s been a long time since I frequented these forums - some funny times offering free frimware & the odd heated debate👀 but it’s also been a wealth of information that’s got me out of hole or 2...
Its not burnout, it’s no motivation, no desire, I just want out now. What started out was magical all those years ago, is now just a daily grind of sorry to say ‘I just don’t give a s#it’ attitude...
There is is another way which I posted some time ago about desoldering the pcb & insering paperclips but that was for a different model so I don’t think that would work but if you had the right...
I don’t really come on here much mainly because of the question asked. I posted on here a few years back about getting out of this industry & I’m partly there. My partner and I set up a care home...
Really can’t believe how unprofessional you lot are!!!!
take off the rear panel & follow the plug wires into the AC PWB. Look for the FC PWB that’s linked to the DC PWB. Follow the pink/yellow...
Lets be honest Debs is one of those engineers that can adapt to any make of m/c & puts an awful lot of ‘engineers’ to shame.
Taken from Ricoh training on process control
Another thing to check is the fuser connection block I.e paper gets trapped in the connector (female side) gives some really funny problems.
Sorry for the late reply but you are so so ................... bloody correct😉 had a mc yesterday & I checked it in input mode & as you described perfectly- 4th vertical jam. Don’t have any love for...
Remove tha back panel, remove the largest circuit board you see, desolder all the components & add a paper clip in the spaces. Works every time😏
Anybody know what Sp 7504-06 is?
4th paper feed s ?
The machines haven't got a 4th station, Tandem tray, 2nd tray, tray 3. LCT has its own jam & I don't think it's the bypass as it has a 4th...
Not sure. I had the same issues on the Ricoh mpc 1500 gel printer. I purchased some latex gloves because I got sick to death of the stuff on my hands.
What's VSG-VSP settings saying? Non default report?
I accumulated 9 points at one stage, 12 points & you're supposed to receive a driving ban🤔 Long time ago when I thought I was indestructible & a bit full of myself because of a company car😔
Well it worked😉 I got about 10 secs sleep😳
I'll add to this with first hand experience I.e I fell asleep at the wheel.
sleept about 1h in 48h and half way through the day was alternating one eye closed to stop myself falling asleep. Didn't...
Just had a mp7502 with intermittent sc670. Powers up but 30 mins later throws a code. Replaced the HDD Probably didn't help trying to flatten the frame with a hammer after the customer bent the fuser...
Looks a bit like the 'firefly effect' with really bad developer in the black. You say you swapped the black pcu? The whole thing inc the dev unit or just the pcu?
Sounds like a lamp has gone in the new sleeve. I've had one on a Metis new out the box fail. I'd go with what copier tech said.
Quick search comes up as k dev motor lock.
What you trading or willing to pay🤑
open the front door 10871087 there is another way but i cant remember the left sided button to press