The maximum password digit is 6 figures (The KM default password is 16 figures which you had stated above).
The control panel button features of this Bizhub 205i looks similar to the Bizhub 195 &...
Type: Posts; User: Franco107
The maximum password digit is 6 figures (The KM default password is 16 figures which you had stated above).
The control panel button features of this Bizhub 205i looks similar to the Bizhub 195 &...
Hi guys,
The mentioned machine had displayed this "MAINTENANCE CALL M2."
I tried to enter service mode so I can reset the IU counter but unfortunately, I wasn't able to enter service mode....
Nope, I didn't clear the code. Is it gonna be done in maintenance mode?
Coz I did switched OFF/ON the machine but nothing happen. It did not reset.
I did try to check the sensors- U031 for the...
Yes, it also gives 11. At the moment I do not have access to our service drive to the check service manual since our sever is down.
Would really appreciate if you can assist.
Thanks,
Hi Guys,
The machine was displaying this Jam code. 0000 after a paper jam.
I had checked and cleaned paper pathway and the sensors thoroughly. Pulled out the fuser unit checked and cleaned the...
Thanks for your response.
I'll order for new drum cartridge and see how it goes.
I had done what you have stated. But since the issue still persist, I'll double check and repeat all the...
Hi Guys,
After I had installed a new toner (CT203367) on an ApeosPort VII 4021. The machine kept on UPDATING TONER.
The updating of toner took more than 30 minutes which is not normal. When I...
Hi guys,
I have this Bizhub 206 which have been displaying this "JAM ERROR OPEN 1st SIDE DOOR" when machine boot up.
I have open the side cover door, no paper jam.
Pulled out the 1st paper...
Hi guys,
I have uncounted this error after solving the squeaking noise from the fusing unit.
I used a CRC spray and lubricated the fusing gears and it got rid off the problem(squeaking...
I'll replace the filters.
Thanks for your time.
Hi guys,
Is it possible to reset the ozone and toner filter of a Bizhub 227. I did tried counter reset but didn't reset filters.
Appreciate all your response in advance.
Have noticed that too. Is there anything else I can do?
Thanks,
I'll update the F/W G00-28 to G00-45.
Thanks,
Thanks , would try a data clear via service mode.
Yes, the format and encryption system settings option are there but I would also like to do Storage Lock which is not available in this model.
Thanks for your help.
Hi guys,
I have a C3320i in the showroom and would like to do Storage Format and Storage Lock.
I've tried but the did not succeed. The Encryption Settings has not been encrypted.
Appreciate...