I tested the stick successfull on anather copier.
Type: Posts; User: CP-1015
I tested the stick successfull on anather copier.
I tried to update firmware from G00-W4 on a C-258 but it stuck at 2 bars. Front cover open. Nothing happens. Front USB ist plugged correct. In the Device Information stands only Version 4.2 but no...
New link for old firmware: https://we.tl/t-USMpmwVzeA
- Unzip
- copy candela file to USB Stick
- connect USB to printer
- turn printer on
- Update goes automatically
- ready
Now, stabilizing leg is in correct position. SD-511 can be opened.
Stabilizing leg is a good idea. And the metal tab in the frame should stop flipping down inside. I don't know who flipped it inside down. I'll try to lift it upper the tab with more power, tomorrow.
60960
I think it's from the photoelectric barrier which when SD-511 pulled out. There is a metal leasure that stops lifting this lever.
SD-511 with perfect funktion. But I cann't pull out because of a black bars on the 511 buttom. It comes only 1 or 2 centimeter out, than blocks.
Thanks advanced.
Merry Christmas!
What error code?
I see, I'm wrong. SMB1 is on. Then test if SMB2 is enabled:
$2 = Get-SMBServerConfiguration | Select-Object -ExpandProperty EnableSMB2Protocol
If (!$2) {Set-SmbServerConfiguration...
It seems you send with SMB1 Protocol.
Open PowerShell Ise as administrator and copy this lines in it:
$Pro = Get-WindowsFeature FS-SMB1
If ($Pro.InstallState -eq 'Available')...
Now I wrote it here: #17
Reflash: https://we.tl/t-UmhjJL0exL
Link: https://we.tl/t-LyCxqlobe9
If you make it with USB you needn't reflash (easy going), but I have. And I have 212A and 2233. Which do you want?
Which file do you need?
Now, I think, the same rights for all, include me.
Drum and developer resetter for A4 and A3 devices:
for all common Konica Minolta machines and identical in construction (Develop, OCE,...
Your PM box is full ;)
Thanks, it's difficult because the chances are greater in the forum, but I'll stick to the rules.
Is it allowed to introduce my Resetter here? The other two has "red cards".
Reason was a defect board. I have had 2 boards with the same error.
It's the same firmware.
Greetings from Bavaria!
https://www.copytechnet.com/forums/asset.php?fid=50401&uid=306635&d=1694443799
The staples (red arrow) doesn't open. So it blocked. I moved the whole rail from an FS-534. Same error. Is it possible...
Vdc-M only 150Volt! Arcing on HV wire?
Thanks, I'll report!