A3
Type: Posts; User: Omkarmore
xerox d95 vertical white lines after 10-15 prints.
54409
hey i have xerox d125 and i am facing problem of vertical white line randomly after 10-15 prints.
i changed drum .
devloper is ok.
try all paper size a4, letter, a3 but problem not solved....
Hey ,
In my canon Ira 8205 after 100 or 50 prints suddenly paper jam 0b00
I checked front door switch , right door switch but nothing happens
Plz help me
iam using only print fuctionof printer and i cleaned glass plate above drum but nothing happens
is there any current issue or potential issue of drum ?
hey ,
i have canon ir adv 8205 , my problem is black spot or small black line on paper because of toner stick on drum
i have replaced following
1) drum unit
2) devloping assembly
3) toner...
Hi,
I bought one canon IR adv 6075 , and whenever I am trying to print on custom size paper ( deck 3 or deck 4) the orientation is always opposite
What can I do ?
I changed many drivers but...
Yesterday I opened developing assembly
3 rod are broken and one spring is there
How to connect that spring
Plz tell me about that spring
Is one of the stirring rod is connected to spring
Plz tell me
Hi,
I have Canon Ir Adv 8205 but i need to supply toner to devloping assembly manually using service mode.
I checked Buffer unit is working fine
Devloping assembly toner sensor is working
What...
plz can anyone help me to run 60gsm paper on canon ir adv 8205 in duplex mode.
whenever i am trying to run 60gsm paper, paper jam code 0115 and 0c10.
plz suggest some setting or replacement of...
Can you give me the photo.
Plz can you send me photo .
Hello ,
I have canon IR adv 6075.
And my problem is my devloper assembly striling sticks are falls and one spring also their in assembly .
Can any one tell me how to joint that two rods and...
How can I differentiate oem vs non oem upper roller in canon IR adv 8205.
How I can differentiate oem upper roller vs non-oem upper roller.
I have my old upper roller and FL3-3600-95J written on it . Can you tell me this is oem or not .
Thanks in advance.
Can I use non-OEM upper roller in canon IR 8205.