replace the M developer and your problem will be fixed!(I had this problem with Chinese torers and the only solution was to replace the developer)
Type: Posts; User: lartis.aineias
replace the M developer and your problem will be fixed!(I had this problem with Chinese torers and the only solution was to replace the developer)
[QUOTE=lartis.aineias;2509514]i see the problem is in the black developer uni60285t! put seals on black drum
60285
i see the problem is in the black developer unit! put seals on black drum 6028460284
Go to meter counter stop 00 stop 01 and stop 0C
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Konica Minolta for 4 months now says that it will be normalized soon.
Without giving a true answer of the situation.
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
does anyone know when the situation with the toners of the production machines of Konica Minolta will be normalized?
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Clean IU with vacuum, and change dhe filter box!
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
I see a digital problem.
2 years ago I had about the same problem, after changing drum, laser, I changed the board and the problem was fixed.
MCB1 board
Στάλθηκε από το AC2003 μου...
Try first to change the fiery cable!
An 2nd i believe image control board
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
some samples517795178051781
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Hi
I have exactly the same problem on c6085.
4M clicks
Tr.Belt life an 1st + 2nd transfer rollers they have 250k.
I try to clean belt assy , registration assy 2nd transfer assy , I change ...
guys this plastic is there to protect the machine when there is a door next to it, when they open it not to hit the machine!
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
is protective in case the machine is next to the door! [emoji108]
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
I think it is
Admin
0000000
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Γράψε λάθος το προηγούμενο ποστ δεν διάβασα το registration.
Πάρε το registration στο χέρι , καθάρισε τα boushings και τους άξονες και δες προσεκτικά πηπως έχει πάρει κόλλα κάτω από τις λαμαρίνες...
Hello Dion.
Try to remove bypass , disable dipsw 36-0-0 and try to print from tray 1! there is a possibility that the bypass separation plate has been damaged.
however look at the pinch rollers...
I believe is the bk drum!
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
We are technician not chemist [emoji23]
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Check the rollers , clutch, and one way on the feed pre feed roller.
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
it would help if you had jam code!
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
Purtroppo, per quanto ne so, questa possibilità non esiste!
Ecco perché il 3070l è più economico del 3070pro
se la traduzione non è corretta è perché l'ho fatta da Google translate.[emoji41]
...
La serie L supporta solo lu202xl lu202m e finisher fs531 + fs612
Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
I know the post is old, but today I had the same code and the problem was in the PRCB!
I am writing this so that we can help a colleague for the future![emoji56]
Στάλθηκε από το AC2003 μου...
Go to printer adj on service mode and change
FD-Mag. Adjustment
CD-Mag. Adjustment
Although with these settings you do not see a difference then god help you!
Στάλθηκε από το AC2003 μου...
How many prints has the machine made? if it has more than a million prints I suggest you change the registration roller!
Check the transfer belt unit is everything ok!
if you have checked and...