My friend, I want two tests .
A3 sheet , both white Print and Black Print
Try to check if the points repeat every 26.5cm
Seems to me drum issue
Sent from my M2101K6I using Tapatalk
Type: Posts; User: Hishamawada
My friend, I want two tests .
A3 sheet , both white Print and Black Print
Try to check if the points repeat every 26.5cm
Seems to me drum issue
Sent from my M2101K6I using Tapatalk
Hisham.r.awada@gmail.com
Send it to me here
Sent from my M2101K6I using Tapatalk
Any pictures?
Sent from my M2101K6I using Tapatalk
what is the distance between the line ?
Can you specify what is the difference? And should they have different prices?
Sent from my M2101K6I using Tapatalk
Hello all ,
I have a question about the drum units that have the same Part number but different letters . Ex.
1111C003(AA)
1111C003(BA)
What do those letters refer to?
...
Stop the sheet before the Fixing , if the issue is visible check the drum assembly .
Perform a full cleanup to the drum assembly and sensors . if issue stays then it could be developing unit issue...
Its better to also replace the timing belt on the gear and the white gear from the other side of the belt.
Sent from my M2101K6I using Tapatalk
?
Sent from my M2101K6I using Tapatalk
hello ,
Since you have replaced everything regarding the image processing , what is left is the laser and the laser glass .
good luck
you have already stated the issue and its solution , the issue is with the ITB itself .
you have swapped the full ITB assembly and the issue appeared on the other machine so definitely ITB issue...
Oce Varioprint 135
Oce Varioprint 6000
Imagepress c600
Imagepress c6010
Sent from my M2101K6I using Tapatalk
Hello all ,
I want to ask if there is any difference between toner USA and Europe.
For example, IPQ-2 in USA is C-exv 20 . Both for the same machine .
Oce Varioprint have toner usa version...
Is the skew fixed or random ?
Can you send me pictures of the rollers of the registration unit .
Sent from my M2101K6I using Tapatalk
Check the fixing thermistors. And send their photos
Sent from my M2101K6I using Tapatalk
Hello , first of all how much is the skew on the back side ? I need values/ photos ? Is the skew have fixed values or random ?
Is it an issue on all type of papers ? .
In my opinion your...
Hello ,
Check the drum gear for magenta, 54547
There is a fiery connected. Tried printing directly through UFRII driver also same.
Done more tests and the colors is perfect on plain media. Only on thicker media / labels the colors will be...
Hello,
I have a IP c710 with color issue whenever i try to calibrate the machine through the gradation sensor.
Each time i calibrate a different result of colors i got . Check the photo...
Hello ,
I have the same issue on canon C600.
Tried Dc-con pcb
Sensor
New bottle
Updated firmware
Full format and new harddrive (i know it is not related)
Wires seems all ok .
Hello ,
What is the paper direction ? And can u please make a test on A3 or larger
Sent from my M2101K6I using Tapatalk
Hello my friend,
First clean the patch and registration sensors in the patch sensor assembly at the top right of the ITB.
Perform Auto-Correct Color Mismatch , if still fails then test PG For...
Mainly this is a sensor dirty issue . Since you cleaned it , try sensor-init in the service mode.
Also make sure to enter all the values under the cover in ther service mode .
Tried Contacting EFI Several times and they always say to contact Canon Company.
I Already Got Fiery Systems for G100 and F200 but for old Versions (V1.0) from canon company before but now I want...
There is a circuit breaker at the rear , check it.
also check the power to the printer if all Phases are OK.