Search:

I have recently update win10 to 11 clean install and now cannot register any firmware on SST, whenever I click register firmware it completes the process normally but after that in the drop down list...

yes seems like, i did some analysis using hdparm command and found the drive is locked with some pass and its in security mode and not responding i/o commands will try ata commands to recover hdd, i...

So drive is dead now? Or they change hdd firmware, I also tried writing all zeroes using dd and it worked but again cannot alter the partition table

Yes drive not detected here but it's visible in disks utility

yes , this error "failed to probe the device udisks-error-quark 0 on sdb" also tried gparted it cannot create partition table neither dd utility is working, It looks like we cannot use canon hdd on...

Thanks I will try this but why I cannot format hdd in pc, windows says cannot initialise disk, linux says some probe error I/o error.

Recently got an old hdd from irAdv6275 want to use it in irA8105 but i couldn't format it using pc, is there any way to format it and then use it for another machine.

Interesting, it looks like 0x01 is some kind of header and then we have 7bytes + 2bytes of data in fixed position also, there is in the 7byte package 4th byte is 00 and 3rd contains only 0x format.

Original one is faulty, it shows nothing not even boots, that's why bought another. I thought series is same thats why bought another but it happens to be for irADV8095 model and the faulty one is...

yes i got fm4-5304-010 since fm4-5305-010 was not available and tried to replace with faulty one and it got booted but shows error e355 although im using its original counter and serial, both...

Refurbished main controller is in working condition, it seems like its impossible to even install controllers from copier of same series to another, is there any way, im only swapping the controller...

I have replaced the main controller PCB with a recently bought refurbished controller now after replacing its giving error e355. Machine is irADV8105, then i noticed that the board belongs to...

Is PCL/PS firmware add-on necessary for printing from PC in canon models like irAdv6255, ir5055 and ir6075 .
even in service mode its showing 0 for PS/PCL but i have managed to take a print from my...

Thanks sir
finally it worked with fresh firmware

No sir,
A student.
are u a canon copier technician?

Sir, its not showing for these models too like ir adv 6075 but irc3100 its fine.
48179

48180
Thanks again.

Thank for your support sir,
I have tried again by re-registering the firmware but still its not showing in the connect model list although it shows in the registered firmware list maybe my firmware...

Thank you for ur reply,
that means i cannot print pdfs directly using thumb drives instead i should use pc for printing pdfs.

Cannot print pdf files in canon ir-adv-6255 although its printing jpg files from memory media/pendrive, as soon as i select pdf files it disables the print button, what must be done, please help.

Model is ir adv 6255 sst ver 4.8 will it support?

Even after registering firmware with the SST ,the model select dropbox is empty please help.
I m using win 10 and even tried using compatibility mode.
Thanking you

Sir i have followed this procedure and even after registering firmware my sst is not showing the model names in model drop box to connect its empty in win 10