Search:

read the second message :rolleyes:

but are they OEM vaccinations?

Reset chips are cheap and unless the controller board is broken and that's why they put it in that machine it should get real percentages, it's not currently giving you real levels so doing 255...

It just happened to me again with a C360, cleaning the drum and crown brush and solved, the question I have is, why does it always happen with the cyan unit?

This is happening to me on a C360, the edge of the drum is stained and causes this, check the drum

cheap on aliexpress

That's it, inclined cylinder

if you mean black and white printing, i choose ricoh.
if you mean color, i choose ricoh.

Is there a way to disable the error window, load paper on bypass tray and have it print directly?

I don't know of any way to print the counter by size on that machine, the only thing that occurs to me, if the counters appear on the web portal, print the page

Web browser or in service mode, sp-8441002 A4, sp-8441003 A5

does not print any color? If so, check the transfer band, it may be blocked

Until last year I used hotmail with these machines for the collection of counters, but both gmail and microsoft have updated their security and stopped working without being able to solve it, with a...

try explorer, the problem is that you have an insecure ssl certificate activated, try restoring the network configuration from the machine

remove the transfer belt and check the surface, if ok, print a test page and open the door when the sheet comes out of the drawer, check which drum has those "drops", there is one of the drops in...

The upper left shadow is interesting to me, what behavior does it have when scanning in A3? I have never had to adjust a lens, the alignment problems I have had have been due to missing slider feet...

I have had this problem when changing the drum cylinder without changing the chip when restoring a unit, if you changed the complete original unit, I would not know exactly what the problem was, but...

I have never seen 0.0% caused by hopper problem, it has always been caused by developer unit problem

I am with you, I would like to know the life of that ITB and I would try a test with Magenta

If magenta has the same delay, we are facing an itb problem, it does not rotate correctly

check the waste toner tank, it should be full of developer

As in any machine, half tone 255 and interrupt printing to see if the drum generates well, as you said that it appears the same when testing another drum, I would bet on the developer unit, counter?

I have not worried in that series, but in development units of the c6500, I have placed plumbing teflon to replace it

I would bet by laser or HV board

I have used that modification when the developers are worn or old, I have seen those lines on developers too, in the office we have a c360 that I can't figure out how it can print without lines, the...

try setting the background setting to -5 on all colors, if the print is ok, change drums and developers