:confused:Does anyone have a healthy Sharp (MX-M453U) device?:confused:
Type: Posts; User: ali.nadri
:confused:Does anyone have a healthy Sharp (MX-M453U) device?:confused:
thanks for your answer.
Using this method, the device works temporarily.
When the device reboots or standsby,
Gives the message again (F2-70)?
Is there a way to disable check the cartridge in Sharp?:confused:
No. I did not print.
Do you have a solution?
Thanks for your follow up.
These files are backup.
Taken with codes 56 and 92 in Sharp device.
Via USB port and network port.
friends:
Does anyone have a healthy Sharp (MX-M453U) device?
The problem may be solved with the following three files:
Files must be downloaded from a healthy device.
The first file with code 56:
MX-M453U_9501731000_NV_ALL_20210223_1155.dat
The second file...
I do not know what changes have been made in the device after entering the code 88-01!
Still gives error (F2-70).
The question is:
Is there a solution for the Sharp device not to check the...
Thank you very much for following up.
Thank you very much for following up.
My suggestion is: do not do this.
Your device may be corrupted.
Warning:
"Do not use this code (88-01) on your device for curiosity !!!"
Attention:
1. Before entering the code (88-01), the device was completely safe. I entered this code out of curiosity. I did not know the consequences.
2- My country is Iran.
3- I tried all the...
Thank you for your answer
Is there a software switch for "Allow public toners"?
Thank you very much for your answer.
No, unfortunately I do not have access to another machine.
If you have access to these devices, please send me the file(Device Cloning).
Yes, I have access to device settings over the network.
Do you have a solution?
Thanks for your answers
Changing these codes did not solve the problem.
Is there a software switch for "Allow public toners"?
"According to previous submitted photos"
I know toners, chips and cartridges are healthy.
But I'm not sure if the cartridge and chip are OEM Sharp!
The hardware of this device is healthy.
The code (88-01) changed all device settings to zero.
Now I do not know which zero should change.
Which code should I change to identify the cartridge?
...
Attention:
"Do not use this code (88-01) on your device for curiosity !!!"
Before I entered the code 88-01, the device worked with the same chipsets!
Now gives the code F2-70?
I tried several different chipsets but it didn't work?
48336483374833848339
48341yes.
I use Sharp OEM toner.
I updated the firmware with the file sent by my friends, but it still gives an "F2-70" error.:confused:
help me!
Anyone an idea ??
Not resolved.