What other messages does this disable?
Type: Posts; User: WackyJack
What other messages does this disable?
I'm assuming when you say you cleaned the sensor, you're talking about the one on the transfer unit on the door? I've had problems with these as well, even on the newest MX models. The usual culprit...
I had this happen recently on a MX-M5071. I replaced the drum, developer, transfer roller assembly, and toner all from a known working machine, and it still kept popping up the F2-40 code. I ended up...
Apparently it requires a login? I haven't used this new product key site, and I don't remember having to log in on the old one, since it has been so long since I last used it. How do I go about...
Right here. On the US service site
61771
And when printing, this is the screen I get. Calls for Letter. If it shows A4 for you, I would check driver settings
61772
Service and Parts manuals are both available on the Sharp Service website. They are listed as BP-FN11/FN12/PN14
I didn't see firmware in your list of things you have tried. Make sure you're at the latest version
Also, the 453 and 283 do not use the same MFP PWB, at least not according to the parts manual I...
Is it always distorted in the same way on every print/copy on non-PDF? And is it distorted on every page in a multi-page print/copy job in the same place?
We had a similar issue with a MX-2610 in a construction trailer. Turned out to be machine placement. The customer had the machine just to the side of a window, and temperatures had recently started...
Have you tried asking on the Lexmark forum? The Lexmark model number is XC4150
Does anyone know if the Lexmark supplies will work in the Sharp labeled machines? I need an imaging unit for a customer, but it is on backorder until the end of this month. I ordered it middle of...
Best practice is to always turn off and unplug the copier before installing any options. Plug in the finisher, then plug in and turn on the copier
Shot in the dark here, but have you tried to reset the NIC?
Sharp has always had weird issues with PDFs. More specifically Acrobat. Foxit has been suggested many times on this forum, and I use it exclusively for PDFs with no problems
Check your Primary Transfer. All these different symptoms may be tied to one board, or they may be separate issues that just all happened to come up around the same time. After replacing the msata,...
This would be my suggestion as well. I don't think a scan board would affect computer prints though. If the original problem was booting, there may have been another problem that came up at the same...
We don't use generic toner unless the machine is so old that we can't reliably source OEM toner, and even then, we really only use it on B/W models. When machines get to the age where we can no...
I don't know of any laser machines that can do edge-to-edge. Because of the fuser, there needs to be some margin to help prevent constant jams. The only way I know of to make edge-to-edge is by...
Assuming the sensor you said you replaced is the Toner Density Sensor (ATC Sensor) on the bottom of the DV unit, the next thing I would check would be the toner motor and the toner transport pipe...
If you have it connected to the network, it might be a corrupt print job. Try turning the machine off, removing the network cable, and booting up again. If it comes to ready and doesn't reboot, you...
Did you remember to remove the shift motor from the delivery unit before installing the finisher?
As far as I know, there is no way to copy address books from brand to brand. They all use different file types. If there is a program to change the file types so they can work, I would love to get my...
Firmware update may help, but usually the Please Wait message when entering Settings is due to the machine not being booted up completely. That may be pointing to the mSATA card
It would probably be best to do a Google search for Sharp service providers in your area and call them, if you haven't already
I have this problem with firmware files on Sharp machines a lot. 49-1 will show all the firmware files I have on my USB except for the model I'm working on at the time. Make sure you're extracting...