Thanks Synthohol - sorry if I wasn't clear, but I was able to get it working. It looks like the first time I ran the Clear All data operation it didn't actually complete properly, but I ran it a...
Type: Posts; User: yakatz
Thanks Synthohol - sorry if I wasn't clear, but I was able to get it working. It looks like the first time I ran the Clear All data operation it didn't actually complete properly, but I ran it a...
Update: It actually works - I had to run the Initialization step again, for some reason it didn't actually do it the first time. I'm a leaving the rest of the post in case anyone has other input
...
I have no idea what you are saying
I am wondering if my firmware files are corrupt or missing something. Or, if the SSD I got is also bad. Or if something else is bad.
I tried two different 2 GB flash drives, I tried them formatted...
I got the SSD today and after I install it, I no longer have a restarting issue. The new SSD looks a bit different than the old one (a few extra chips), but the machine definitely gets further in the...
Still restarts every few seconds with the SSD removed - don't even get the shark fins, just the orange ring on the start button. I will look for a power supply board.
I tried that too. When I bent down next to the machine to reach the cord, I heard a high whine that I don't remember hearing in the past, so maybe an issue with the power supply?
I can not get...
I see the service manual says to contact KM about SSD replacement and using the SSD from another machine can cause data loss.
I am doing this for a nonprofit organization with no service...
No change.
Does this have anything to do with how the front lights light up, i.e. if it shows two lights, that is the second step?
I tried swapping the RAM just in case, but that didn't...
This machine has been working fine for a long time. This morning I came up to it and it was power cycling - the white bar would start to light up and the screen would show up for a second with the...
Weird - I looked again and the job is listed now... I don't get it.
If I send a job to my C364e set as proof print, it prints one copy, but never shows me the option to continue to print. The current job list while it is printing shows the correct number of final...
I have been debating whether it is worth buying the keyboard tray. I don't want to have random stuff hanging off the machine.
Is there any setting or software switch which would make a C364e default to the enlarged keyboard any time a keyboard is shown?
58149
Now that everything is working properly, I did an initialization on my c364e to get rid of some data from the previous owner and, of course, I now need the animations.
While I am upgrading...
Thank you, that was really helpful. I managed to get everything put together despite some missing pieces and it looks like I can hole punch, staple, and fold just fine.
I found a few interesting...
I bought an old-stock finisher and used bridge for my C364e. The instructions that came with the finisher say to see the copier manual and the bridge didn't come with installation instructions. I am...
Thanks for the help. I am downloading the files now.
I know the machine is old, but it came with the toner in it, plus two unopened blacks and one unopened of each color, so it should serve our...
Someone donated a C754 to a non-profit organization that I work with (along with tons of toner). They did a complete reset and hard drive format from the service menu ([System 1] -> [Initialization]...
One of my clients has an old Ricoh Aficio MP 4000B that we are trying to get a bit more life out of. We would like to enable printing - I already have the memory and hard drive, but I need the...
Confirming that adding a new stick of memory fixed the SC819 issue. Still looking for the right Printer Unit card. I think these machines are so old that they aren't even going off lease anymore.
This unit only has one RAM slot. I ordered RAM and I expect it to come on Friday, so I will update then.
My outstanding questions are still:
What is the correct Type? The service manual says...
Thanks for that. The machine only started showing this error when Ethernet was enabled. It was not shut down improperly.
It has memory and an HDD. I took the memory out and tested it in another...
One of my non-profit customers was supposed to get a new network printer/copy machine, but it has been delayed due to the pandemic. They asked me if it is possible to enable printing from the network...