I did but nothing changed
Type: Posts; User: Maged_elagamy
I did but nothing changed
No
I can't agree more
double check the fusser unit
No i didn't replace the wire but i checked the motor is running normal and wire , pulley and carriage seems fine and normal
The client said the error occured suddenly when copying some papers via...
The scanner moves to home position as normal and the error appears after 20 seconds
No I didn't check them in input /output mode
But i already replaced the sensor
agree
it's a fuser problem i think
check fuser belt or may be loose spring
Did you perform Forced toner supply as advised ?
if you did so and still same problem
try to put some toner manually in any development unit and print a test page
if it get any better then i had a...
I had an usual call from a usual client with an error SC 120
well ! i thought it will be an easy task
just clean the HP sensor and some mirrors
but it turned to a nightmare
the service say it's...
That's would be nice
Hi there
I wonder if u found a solution for this situation
are u sure the toner drained to the waste or just a conclusion ?
Genuine toner or compatible ?
what is the condition of development unit ? and TD sensor ?
is there any tutorial how to use it ?
of course not
i tried another PCDU form another machine that's working fine
i checked it and it's not clogged and working fine
the tricky thing is the bottle supplying toner to the hopper but the spiral is not supplying to the PCDU
so i replaced the hopper with 100%...
I don't know the version
i can check later
but i'm pretty sure it's a mechanical issue
some ppl seek the cheaper regardless the quality
and pay what he saved to the technicians :D
this damn cable cause so much troubles
well that was unexpected :D
i didn't try new one but i checked the bottle and i'm 100% sure it's working fine
even i've tried supplying toner manually
my question is , if the motor rotating the bottle gives movement to the...
i've tried new unit and it didn't solve the problem
after replacing PCDU it worked fine as the new unit had sufficient toner
but still no toner is supplied in the unit
a RICOH MP C305 giving loading toner msg and there is no magenta color on printed paper
well at first i supposed it's an easy task
here what i did
i checked the M toner cartridge and it's fine...
good for u and for the customer as well
but this is not the situation in many cases
well it never worked with me when the customer uses shitty toner
and i always have to replace toner and in some cases the developer too