Search:

Type: Posts; User: Crowfeather

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: HP MFP 432fdn (Samsung 4070) garbage printing

    When you install a device via USB it will run on different drivers to if you install it via Network.
    Solution is to install the printer to customer computer via network cable directly and add device...
  2. Replies
    5
    Views
    1,422

    [Misc] Re: Multixpress 3320 Default copy settings.

    Ecomode is your friend.
  3. Replies
    2
    Views
    1,053

    Re: Samsung CLP-415N printing problem

    Replace your shonky yellow toner with something decent.
  4. Replies
    5
    Views
    1,152

    Re: Samsung Colour laser printer CLP-365W

    If its not a consumable out flag, then you will need to get a copy of the service tool to do some diagnostics.
    If the printer has a syncthru page you could try accessing that for alert information.
  5. Replies
    1
    Views
    1,074

    Re: Samsung CLX-8175 errorA3-3311

    If you've replaced the fuser unit, and no paper is jammed in an area to flag the thermistor, then look at the Fuser PCB or Fuser Motor.
  6. Replies
    4
    Views
    514

    Re: HP M283fdw contrast problem

    Perform manual calibration.
    If problem persists do a jam test.
    If jam test shows complete image on drums, then check transfer mechanism is sufficiently pressurized.
    If jam test shows incomplete...
  7. Replies
    22
    Views
    2,230

    Re: HP M479 contrast problem

    Sounds more likely that the internal assemblies are not sufficiently pressurized. This can occur if the chasis is bent (damage in transit), or if the assemblies on the rear door are not properly...
  8. Replies
    5
    Views
    1,152

    Re: Samsung Colour laser printer CLP-365W

    Do you get the same problem if you power on with no cartridges installed?

    If you hold down the cancel button for a couple of seconds, with the toners installed it should start trying to print...
  9. Re: Samsung MultiXpress C9301 – Find drivers for macOS Mojave?

    You can install the X4 or X7 series drivers as they use the same architecture. The CLX-9301NA closest brother is the X3220NR, but the X3220NR uses different architecture.

    You could be getting the...
  10. Replies
    5
    Views
    1,057

    [Misc] Re: Looking for a reliable A4 MFP printer

    If you want something super reliable then the MF742CDW

    If you want something that is okay, and cheaper on the ink a Samsung C480FW or CLX6260, all alternatively some of the Kyocera ecosys have...
  11. Replies
    10
    Views
    1,483

    Re: Remote printing ??

    At this point why not just use Papercut NG. Its a free solution if used in this limited way.
  12. Replies
    4
    Views
    832

    Re: Kyocera CPP

    I always thought tiered coloured billing was to up the price, because whether your doing 1% or 10% your still running out the life on your maintenance items.

    However, if customer is doing 50%...
  13. Re: Ideas on Copier Business Management Software

    There are a lot of Print Management systems from an MPS perspective that allow you to manage the whole works from ticket raising, stock holding, readings etc.

    Dyalog is one example of this that...
  14. Replies
    4
    Views
    807

    Re: Copystar is Dead Now Kyocera

    Sounds more likely they just wanted to reduce manufacturing costs of shipping two identical boxes with different brands and, no longer have to stock two different lines of product within their...
  15. Replies
    2
    Views
    1,435

    Re: Error A1-4111 on Xpress C1810W

    The manual you are reading is incorrect, the A1-4111 and A1-4112 are actuator motor errors. Very common error on the Samsung A4 kit, and is resolved by replacing solenoid/main drive unit. A quick...
  16. Replies
    4
    Views
    361

    Re: X7600GX Pink hue on 2nd side scans

    If you get this ever again, just do a calibration with calibration sheets (essentially white card). It is stated to do these calibrations (shading and position adjustment) when replacing ADF, but...
  17. Replies
    9
    Views
    1,244

    [Dead] Re: Transfer belt error message

    The A1-4111 and A1-4112 errors are to do with the solenoid/main drive unit. Actuator motor failure is the message. No idea how you are getting feed motor or Main board from that.
  18. Replies
    4
    Views
    636

    Re: Samsung X4300xl Not calibrated

    Remove and re-insert LSU.

    If issue persists, check the ACR report.
  19. Replies
    9
    Views
    3,476

    [Error Code] Re: Papercut Removal - SC637-01

    Just do a system rebuild.
  20. Replies
    10
    Views
    1,483

    Re: Remote printing ??

    If there is no option to setup SMTP for inbound then just download a free NG license of papercut, max 5 users/printers and supports email to print.
  21. Replies
    1
    Views
    2,922

    Re: Samsung Xpress C480FW prints black pages

    Either you blew the HVPS or you cabled it wrongly. This is happening as the imaging units are being sent too high charge.

    Your original problem could be down to paper rather than fuser unit being...
  22. Replies
    8
    Views
    1,172

    Re: HP E87740DN

    Many manufacturers do this already its not just a HP thing. They will serapate 40PPM upwards from 20-40ppm machines. The 20-40ppm will all be almost all identical, and the 40-60ppm will be almost all...
  23. Replies
    3
    Views
    704

    Re: samsung sl-c460fw colors offset

    The printer draws an image internally on the ITB Belt /|/|/| pattern.
    There is a sensor that reads this to calculate where toner should go.

    You can force recalibration by removing and reinserting...
  24. Replies
    3
    Views
    430

    Re: DCP-8410 Service Items

    What I don't understand is the reasoning behind it.

    All of the traditional PM parts are those that wear/tear through friction (Rollers/Fuser/Belt)

    How does an oscilating light and some mirrors...
  25. Replies
    3
    Views
    496

    Re: CLX-4190 no color, K only

    Unfortunately, not for this model.

    It should be very similar as the CLX-6260FW and SL-C1860FW in design I believe (i think it also uses the JC96-06514A?). You can view the transfer belt by...
Results 1 to 25 of 119
Page 1 of 5 1 2 3 4