Agree, the machine are pretty solid. But you need also take care of thing in the future regarding this machine. The thing about canon machine is its pretty straight forward regarding repairing this...
Type: Posts; User: Syarif98
Agree, the machine are pretty solid. But you need also take care of thing in the future regarding this machine. The thing about canon machine is its pretty straight forward regarding repairing this...
Congratulations mr mike! You have the courage to go through the mud to find and solve the problem and i respect that. In hindsight. It is not easy to find the problem, from print examples and we need...
Try looking at pickup unit area. And clean the pickup unit. You need to open up the cover and take the whole unit to clean it. I have a customer whose have dirty pickup unit tray 1. Because of it...
I usually have problem with low life of the fuser film machines older brother, ir 3245, i think share the same film with ir 2525. But for ir 2545 not so much. Because the film are consider step up...
Didn't transfer the ram, but i do transfer the memory pcb.
Sorry i just getting work today, yesterday are holiday iat my place. I will update later
I don't think it's dead. Swaping main con board make screen produce image right? So there's still life in control panel. I just need to work around on how to erase the e0355 error it give afterward....
Although that may be the case, it didn't work that way around here. And if so this machine is toast, it must have explainable reason why, and it give very bad rep for me if i cant repair this machine...
Are serial pcb same as main con pcb?
Thanks for Goodluck, i have changed the hardisk and it still didn't work. I busy till late afternoon just now so i only have 2 hour to do the troubleshooting. And so far no luck on changing hdd and...
You're talking about can't print by network right? Can't print through network, so nic card make sense. So far i didnt meet the problem related to nic area. Print controller board? And you say...
Swaping the control panel with substitute one also didn't work
Changing the hard disk didn't work
Alright, i pulled hdd from canon adv 4225 machine recently, i will use that hdd
Actually i already did the changing the hard disk but i will change it again and see how it goes
have done that, change main con pcb with substitute one and use machine original tpm and flash pcb and produce same error e0355 004
Ok i will install refurbished hard disk and see how it goes
Ok i will try swapping the control panel and re seating the connector see how it goes. And i will put back the original board this time. My manager are responsible for our tech job but not the owner...
hello and good morning. i have problem at the machine adv 4225 persist for nearly 2 month now. this problem have bugged me and i really need to solve this problem. the problem are when on the machine...
hello and good morning. i have problem at the machine adv 4225 persist for nearly 2 month now. this problem have bugged me and i really need to solve this problem. the problem are when on the machine...