Search:

I appreciate if you can enlighten me how can I upgrade it. We have previous machine which we upgrade with no issue.

I have try both also cannot. Overwrite all can’t upgrade the mn con and try the menu
way just manage to upgrade the dc con and r con..

Now the mn con still remain the old version

Good day guys,

We have a unit iRADV 8595 with firmware version 46.36 MN Con and we try to update it to version 74.12 MN Con by using USB
it's giving a message standard partition error after...

Good day guys,

Thank you for your suggestion.

For your information I have power OFF the machine before the paper pass thru fixing unit.
When I remove the paper the image is like the sample...

Good day everyone,

I attach with sample print on my Canon iradv4545 machine. I have change almost the parts for this machine
all P.C.B as well laser unit but can't find problem. Any one can...

Good day guys

Since the firmware version I&II different with version III, I wonder the board like main controller and DC controller are identical the same all version ?

Good day guys

Just check with you guys nowadays all iradv canon model version I , II & III is the firmware is the same ?

Good day guys,

Finally I found the solution to set LTR size to A4size for high capacity cassette type A1.

Go to service mode copier>option>ACC>HCC-P change the value to 0. (level 1 page 2 of...

Hi Giogi,

As advice from you I have refer to Service Manual Chapter 5 nothing is mention for the setting the high capacity cassette
change LTR size to A4 size.

For iRADV8585 series you can...

Good day everyone,

I have 1 unit iRADV C5550 with High Capacity Cassette Type A1.

This high capacity cassette is working but the display panel show LTR size. The cassette 1 & cassette 2 is is...

Finally I replace a Main Controller 2 P.C.B problem solved. Thanks for the input

Hi everyone,

I have a Canon IRADV 4245 giving error code E804-000. It will power OFF automatically if you leave the machine ON.

I have change the Main Controller, Engine Controller P.C.B, Power...

Good day to all

Having a iradv4225 the panel error red light keep blinking. Machine no error code indicates.

Can't make copy and print report from the machine. Any idea ? Thank you

Hi Good day to you,

Problem solved by swapping another unit of ITB assembly from another unit. That defective unit I have disposed it as I have extra unit
Thank you for your advise.

Good day to all
I have a unit iradvc5235 when you print a configuration page or print list for counter list the machine will produce a blank copy.
Machine when do PG10 test output there is image...

Will try out again take from working condition machine to interchange. Thanks

We did this change the connector and wires which connected to paper feed

Hi Guys,

Any clue what else to check the problem ? Thank you

Hi Good Day to everyone,

We have one unit iRADV 4225 which the cassette 1 paper compartment with no paper but indicate got paper. When you
press copy button machine will indicate paper jam. We...

Good day everyone,

I have a unit iRADVC 5240 with error code E102-0101. Have swap with a working condition DC controller P.C.B
and clean the laser unit polygon mirror still same problem.

Any...

Ok will try this method enter factory mode to clear it. Thank you very much for your idea.

Hi Darknet93

Thanks for your suggestion. For your info I have swap from another unit working machine the control panel and today change
the HDD still the same. Can't go into service mode when...

Good day everyone,

Facing a problem iRADVC5250 can't enter the service mode to clear the password.

When you power on the machine prompt a log in display to enter user name and password. End...

Thank you for the information. Will try the method

Hi Copylady 72,

Replying your question :- 1) Yes the HDD is working condition from another unit and is the same model iRADV6555i
2) Yes we trying to load the...