Thanks, Drp02 for the file !!!
Type: Posts; User: CopierTechLady
Thanks, Drp02 for the file !!!
Does anyone have access to the Parts Guide for the Sharp MXB402?? If so, would you be able to send me a link for it?? Thanks!!
There are two possible ways to get to SP Mode:
1. Remove small cover on left side of operation panel ( there are three buttons). Hold the button closest to the front while simultaneously...
No, I don't have a service manual and do not know how to enter service mode. I hardly ever work with Oki's. Mostly other brands and models.
Could you give me a link to get the SM or the part...
Are there any Oki techs out there that might be familiar with the MC573? I have one that when the paper gets just to the exit of the fuser, it stops (paper just about an inch or less sticking out),...
I went back to my customer, after reviewing how to get to the black dispenser assembly. I slowly and carefully disassembled the machine and was able to remove the assembly. I took it completely apart...
I went back to my customer, after reviewing how to get to the black dispenser assembly. I slowly and carefully disassembled the machine and was able to remove the assembly. I took it completely...
Thanks Jettdog for the information. Would you happen to have a link for the service & parts manuals?
Is it the Dispenser Assembly K (part number 094K93290) or is it the Dispenser Motor Assembly...
So where is the black toner dispenser located? Is it part of the drum unit or inside the machine cavity? I don't have access to a WC7225 Service or Parts manual to locate it or read theory of...
I have a WC7225 that keeps getting the "Replace Black Toner" after replacing the toner cartridge. The first cartridge was empty, and after installing the new one (OEM) it still called for new toner....
Do any of you HP techs know what the passcode is to enter the service menu on an HP CLJ CP5225. I have tried to find a service manual for this model (online) and have been unsuccessful.
Thanks, kp101 for your input. I have already been back to the original customer, cleaned the underside of the glass and used some Brillianize. (Someone else suggested the RainX, but I didn't have...
Thanks, copiertec...I am going back to this customer on Wednesday (Apr. 28), and plan on disassembling again and cleaning the glass then treating it with the Rain X. So, I guess I will soon see if...
Thanks, blackcat4866, for your response; some good tips to try. I had been wondering about possible ozone contamination causing the fogging.
Easy Peasy....HaHa....very funny!!
Thanks, for responding and confirming it is a common issue on these machines.
Thanks, Phil for the suggestion.
Hey Sharp guys, has anyone had the underside of the scan glass get fogged ( on a MX-B402)? I just a week ago disassembled (to get to) and cleaned the underside of the glass. It is starting again. ...