If the website won't let you order the part you have to send a copy of the parts edoc with needed part and part # highlighted. I need an emergency part and still havnt recieved a response.
Type: Posts; User: Jettdog
If the website won't let you order the part you have to send a copy of the parts edoc with needed part and part # highlighted. I need an emergency part and still havnt recieved a response.
Man, I'm getting old and have the hardest time understanding Xerox support people in India. I'm sure they have trouble understanding my southern accent also
Toner dispenser for black is either broken or clogged
Yes they are the same
Getting multiple calls over the past week in a admin building with print jobs requiring resources. Job history shows the print jobs are asking for a different type of paper then whats in the machine....
[Correct
The second file
Have you removed the transfer belt and looked at it?
Test the registration sensor, motor and clutch in service diags.
dc330
077-104 sensor
042-003 motor
077-002 clutch
If you've already replaced the belt and imaging unit, it could be anything. Bad laser, bad high voltage, something in the black development drive. Since it's brand new, I'd call Xerox and have them...
Does it do it in all colors?
I had the exact same thing happen to me. Brand new. Installed. Tested thoroughly. Customer called back later that day saying the machine had an error. Tool it apart and found the rack gear was broken...
Whats the belt cleaner or waste toner box look like? Belt cleaner may be full
Heck yeah,
Not that bad of a job if you've done it before. Usually there's also a grinding noise associated with the error.
P/N 094K93290
5204752048
Does it make copies through the adf?
It's the black piece the toner cartridge sits on. You'll have to remove all of the consumables. Front and right side covers and top exit cover. Remove hvps on right side. You can get to the dispenser...
It's the black toner dispenser. Very common problem. The auger system is not transferring toner to the drum
Enter CSE Diags
Adjustments
dc301 NVM Initialization
Select network and all then select initialize
Yes
Upgrade System (Printer) Software / Firmware - AltaLink C8030/C8035/C8045/C8055/C8070 - Support
This worked for me
Here is how you can still use (proper) Internet Explorer in Windows 11 - Neowin
Set machine up at my office using a gmail account for scan to email and it worked properly.
Delivered to customer and scan to email is now not working. Customer uses G-Suite.
Any ideas?
EDOCs say to perform the following
dC609 Document Glass Registration
dC610 CCD Lamp Profile Adjustment
dC608 Document Registration Procedure
dC945 IIT Calibration
What's the full code you're getting?
How's this working out for everybody?