Update: Changed the drum today and problem solved.
Thanks a lot for your time and help guys!
Type: Posts; User: Beastfury12
Update: Changed the drum today and problem solved.
Thanks a lot for your time and help guys!
I don't really want to mess with the voltages, but after replacing the drum I shall give it try is it's not fixed.
I will run the gradation test prints by tomorrow if the problem still persists.
A4 - LEF / A3 - SEF
Yea, Will replace the drum tomorrow.
Oh no, maybe i wrongly wrote it but Thick 4 i use on 280gsm matte and 80gsm Plain Paper.
The fuser roller is perfectly clean and smooth no traces of anything. Running an a3 page and opened the side door, and the marks would start when in contact with the ITB.
I did ran empty thick 4...
Drum Life: CMY 48% and K 3%.
Fuser: 80%
ITB: 59%
TR: 77%
Total Page Count: 117k
The media i usually print are 80, 130 and 280gsm (max i ever ran through was 300g).
Yes, I am using all genuine...
Last week, I was printing large amount of colors on matte stock thick 4 and ran out of paper only to notice 3 hours later...
Had a couple of sheets left, printed perfectly then the next day I...